765005
111
Zoom out
Zoom in
Previous page
1/124
Next page
1.11 Onzen Cloudy Water Troubleshooting Flowchart
Onzen™ System is
producing Chlorine.
Balance the water
again and wait 24
hours. FCL should rise
Drain water. Re-ll
Spa. Be carefull not to
let the PH level go
above 7.6
Turn the setting up in the
programing. Add Arctic Spas
Boost to rise levels munually.
Monitor the FCL daily as you
may need to turn down the
Onzen™ Cycle Duration time
to prevent over-chlorination.
Watch for bubbles frequently
over the next few hours
Call Service
Are small
bubbles coming
from the Onzen™ Output
electode?
Do the
Bubbles cut
out?
FCL
increased? Monitor
I have an Onzen™ System and my water is cloudy
Carry out a CH Sodium Chloride test
Carry out a Sodium Chloride test
Carry out a TA test (Total Alkalinnity)
Carry out a PH test (Potential Hydrogen)
Carry out a FCL test (Free Chlorine)
Check that all settings are set in accordance with
the settings on this manual
Add required amount of salt
in accordance with the chart
on this mannual ensuring TA
& PH are tested and adjusted
as required
Reduce Sodium level by drining water
from the Spa and replenishing with
fresh water and test/adjust TA, PH and
Sodium in accordance with
the settings on this manual
Add Arctic Pure Salt Water Balance in
accordance with the instructions on the
bottle to lower TA accordingly
Add Arctic Pure Salt Water Balance in
accordance with the instructions on the
bottle to lower PH accordingly
Add Arctic Pure Perfect
Balance in accordance with
the instructions on the
bottle to rise TA accordingly
Add Arctic Pure Adjust Up
in accordance with the
instructions on the bottle to
rise PH accordingly
Add Arctic Pure Adjust Down in
accordance with the instructions on the
bottle to lower PH accordingly
Carry out a Sanitizer
Production test
Use Calcium Reducing Prod-
uct such as Arctic Pure Best
Defence to lower CH to
below 150 ppm
Adjust settings in
accordance with the settings
on this manual
Are the
Settings
correct?
Is
CH below
150 ppm?
Is Sodium
Chloride between the
required range:
2000 - 2500 ppm?
Is TA
between the
required range:
80 - 100 ppm?
Is PH
between the
required range:
7.2 - 7.6 ppm?
Is FCL
between the
required range:
1 - 3 ppm?
Carry out a Sanitizer
Production test Replace Filtert
Are there
Signs?
Yes
Yes
No
No
Below
Below
Above
Above
Below Above
Below Above
Yes
Yes
Yes
Yes
No
No
No
No
NOTE: All checks
and tests should
be carried out in
accordance with
this Arctic Spas®
Onzen ™ Guide.
111111
Understanding Onzen™
Owners Manual - Onzen™
111


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arctic Spas Frontier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Frontier in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info