765005
62
Zoom out
Zoom in
Previous page
1/124
Next page
Startup Programming
Water Temperature Regulation
In a regulation cycle, the system rst generates water ow
through the heater housing and the plumbing, in order to
ensure accurate water temperature readings as well as
avoiding heater activation in dry conditions.
After verifying pump activation and taking a water temper-
ature reading if required, the system automatically turns
the heater on to reach and maintain water temperature at
Set Point.
The “Heater” indicator lights up when the heater is
on. It ashes when there is a request for more heat
but the heater has not yet started.
Cooldown
While performing this task, the heater is not allowed to
turn on and its icon ashes.
Smart Winter Mode
Our Smart Winter Mode protects your system from the
cold by turning pumps on several times a day to prevent
water from freezing in pipes.
The “Smart Winter Mode” indicator lights up when
the Smart Winter Mode is on.
Light Key
Press Light Key to turn lights on. A second press turns lights o󰀨. A
built-in timer automatically turns light o󰀨 after 2 hours, unless it has
been manually deactivated rst.
The “Light” indicator lights up when light is on
Up / Down Keys
Use Up or Down key to set desired water temperature. The tem-
perature setting will be displayed for 2 seconds to conrm your
new selection.
2 pump spas have a combined Up/Down Key. Hold the button to
increase the parameter and release the button to stop. Hold the
button again to decrease the parameter.
The “Set Point” icon indicates that the display shows the
desired temperature, NOT the current water temperature!
Program Menu
Press Light Key to turn lights on. A second press turns lights o󰀨.
The program menu is accessible by holding down the Light key for
5 seconds. In the program menu the following parameters can be
set: clock, lter or purge cycles, economy mode and temperature
units. While in the program menu, use the Up or Down key to
adjust the parameters and use the Light key to jump to the next
parameter. The changes will be saved after the conrmation of the
last parameter only. If there is no action taken for 10 seconds, the
system will exit the program menu without saving any changes.
Owners Manual - Core Series
6262
62


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arctic Spas Frontier at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Frontier in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info