765014
114
Zoom out
Zoom in
Previous page
1/124
Next page
*** IMPORTANT NOTICE ONZEN V8 ***
These cells are considered a consumable item and are now designed to be replaced by the
customer in order to be more user friendly. DO NOT GET THE INTERNAL CONNECTION WET!
To change your salt cell remove the set screw on your salt cell with a Phillips screwdriver. Now
unthread the salt cell from the housing turning counter clockwise. This will require you to use your
muscles as the cell is threaded in quite tight to prevent any water from getting on to the 12 volt
connection. Before threading in the new cell put a generous amount of dielectric grease in and
around the 12 volt connections in the centre of the housing and on the end of the cell. Now thread
the new cell into the housing. There is a notch built into the threads that will stop the cell precisely
where the set screw needs to be installed. If the cell is changed under water the connection will
get wet and corrode. The corrosion will destroy the connection between the salt cell and the salt
cell housing. This corrosion will be visibly noticeable upon inspection. Warranty will be void If
corrosion between the salt cell and salt cell housing is detected.
114114
Understanding Onzen™
Owners Manual - Onzen™
114


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arctic Spas Eagle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Eagle in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info