765014
83
Zoom out
Zoom in
Previous page
1/124
Next page
Step 2. Test and Adjust pH (Use drop Test Kit)
Test pH. Levels should be between 7.2 – 7.6. If pH is high, (over 7.6) add Arctic Pure, Salt Water Balance.
NOTE: Salt systems naturally drive pH levels to increase, strive to achieve a balanced pH level.
NOTE: High pH will cause calcium to precipitate (fall out of suspension). The problem with calcium falling out of
suspension is that it collects on the heater and pump, and shortens their life.
Step 3. Mix Salt Crystals
Dissolve 1/3 of the required recommended salt dosage in a 5 Gallon (20 litre) pail of hot water.
Refer Arctic Spas – Spa Boy Salt Dosage Chart contained in this guide.
WARNING: Salt causes pH to rise, to help ensure pH can be managed within the target range, it is most impor-
tant not to add the entire salt dose in one step. If all the salt is added in one dose it may increase the pH level to
an unmanageable level that requires the spas water to be drained.
Step 4. Add Salt to Spa Water & Re-Test TA / pH
(a) Slowly pour the dissolved salt from the pail into the spa water.
(b) Run pumps for 5 minutes to help mix salt blend through.
(c) Wait 1 hour.
(d) Then re-test and adjust pH level accordingly.
Refer: Steps 2 for correct pH levels.
Step 5. Repeat Steps 3 & 4
Repeat steps 3 and 4, ensuring all sub steps are carried out accordingly.
Step 6. Repeat Steps 3 & 4
Repeat steps 3 and 4, ensuring all sub steps are carried out accordingly.
Step 7. Test Sodium Chloride Level
(Aquacheck Salt Test Strips are suggested) Also refer Sub Steps to Help Ensure Sodium Chloride Test Strips
are Used Correctly. You will now need to test sodium chloride levels. This can be carried out using a salt tests
strip. If sodium chloride levels are low, dissolve 1/2 lb (225 Grams) of salt (using cup provided) into hot water.
Pour the dissolved salt into the spa water. Test sodium chloride level. Repeat until required sodium chloride
level is reached:
Understanding Spa Boy®
NOTE: For start up it is recommended to strive for the minimum salt dosage. Once a Sodium Chloride reading
has been taken and the minimum salt dosage achieved, it can be increased slightly to accommodate spa usage
and bather load.
NOTE: The Arctic Spa Boy Salt Chart in this guide provides the estimated impact of adding ½ lb (225Grams) of
salt to your spa.
Spa Boy Owners Manual
Spa Boy Owners Manual Version 1 Revision 1 (R1)
Page 18 of 35 Issued 20 Nov 2014
Steps to Establish Chemically Balanced Water With Spa Boy
Step 5. Add Salt to Spa Water & Re-Test TA / pH
(a) Slowly pour the dissolved salt from the pail into the spa water.
(b) Run pumps for 5 minutes to help mix salt blend through.
(c) Wait 1 hour.
(d) Then re-test and adjust Total Alkalinity level accordingly.
(e) Then re-test and adjust pH level accordingly.
Refer: Steps 2 and 3 for correct TA/pH levels
Step 6. Repeat Steps 4 & 5
Repeat steps 4 and 5, ensuring all sub steps are carried out accordingly.
Step 7. Repeat Step 4 & 5
Repeat steps 5 and 6, ensuring all sub steps are carried out
accordingly.
Step 8. Test Sodium Chloride Level
You will now need to test sodium chloride levels. This can be carried
out using a salt tests strip.
If sodium chloride levels are low, dissolve 1/2 lb (225 Grams) of salt
(using cup provided) into hot water. Pour the dissolved salt into the
spa water. Test sodium chloride level.
Repeat until required sodium chloride level is reached:
Spa Boy Version
Minimum
Maximum
Version 1 R1
2000ppm
2500ppm
Note: The Arctic Spas Spa Boy Salt Chart in this guide provides
the estimated impact of adding ½ lb (225Grams) of salt to
your spa.
Note: Having the correct dosage of salt concentration, will reduce
potential corrosion and increase the life of the Spa Boy
Output Electrode.
Spa Boy Version Minimum Maximum
Version 1 R1 2000ppm 2500ppm
Owners Manual - Spa Boy®
8383
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arctic Spas Eagle at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Eagle in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info