765023
100
Zoom out
Zoom in
Previous page
1/124
Next page
TERM DEFINITION
Potential Hy-
drogen
(pH)
The pH level is the measure of alkalinity.
pH is measured between 0 and 14 denoting various degrees of acidity or alkalinity.
Neutral water has a pH of 7.0 Water below 7.0 is acidic and becomes more acidic as it approaches
zero.
Water above 7.0 is alkaline and alkalinity increases as it approaches 14.
When the pH of water is 7.0 or below, chlorine will act primarily as a sanitizer. At this level, it is very
e󰀨ective at killing bacteria.
At 7.4, chlorine will act equally as a sanitizer and oxidizer.
Above 7.8, chlorine will act principally as an oxidizer.
The pH of chlorine is 11.7ppm.
Spa water is considered balanced if the pH level is within the target range, between 7.2pH to 7.6pH.
Adding chlorine either automatically through a salt system or manually, into spa water with high
pH, above 7.6pH, will further increase the pH level and dramatically reduce the e󰀨ectiveness of the
chlorine as a sanitizer. This must be avoided by rst reducing the pH level into the target range 7.2pH
- 7.6pH.
The chart below reects the loss of sanitizer e󰀨ectiveness/sanitizer e󰀨ectiveness based on the spas
water pH level:
pH Level Sanitizer (Chlorine)
Loss of Effectiveness
based on pH Level
Sanitizer (Chlorine)
Effectiveness
based on pH Level
7.0 pH 27% 73%
7.2 pH 38% 62%
7.5 pH 50% 50%
8.0 pH 78% 21%
8.5 pH 90% 10%
6.0 pH 4% 96%
6.5 pH 10% 90%
Maintaining a Balanced pH level between 7.2pH and 7.6pH is extremely important for:
• Optimizing the e󰀨ectiveness of the sanitizer.
• Maintaining water that is comfortable for the user.
• Preventing equipment deterioration.
• Note: Salt systems naturally drive pH levels to increase, strive to achieve a balanced pH level.
If the spa waters pH level is too low, the following may result:
• The sanitizer will dissipate rapidly.
The water may become irritation to spa users.
The spa’s equipment may corrode reducing life expectancy.
Low pH can be raised by adding Arctic Pure, Adjust Up to the spa water.
If the pH level is too high, the following may result:
The sanitizer is less e󰀨ective.
• Scale will form on the spa shell surface and the equipment.
• High pH will cause calcium to precipitate (fall out of suspension).
The water may become cloudy.
High pH can be lowered by adding Arctic Pure, Salt Water Balance to the spa water.
It is important to check the pH on a regular basis. The pH will be a󰀨ected by the bather load, the addition of
new water, the addition of various chemicals, and the type of sanitizer used.
100100
Understanding Onzen™
Owners Manual - Onzen™
100


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arctic Spas Aurora at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arctic Spas Aurora in the language / languages: English as an attachment in your email.

The manual is 5,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info