288851
43
Zoom out
Zoom in
Previous page
1/55
Next page
85
85
22.1 Connect & Test Method
22.1 Connect & Test Method
Even if connecting audio-visual equipment is not your strong suit, by following our instructions and applying our
Connect & Test method, you will be able to verify that your connections are correct. Refer to the color connection
diagrams in the back of this manual while reading through each section below.
22.2 Connection (1): Powering the TV docking pod
22.2 Connection (1): Powering the TV docking pod
Plug the included adapter/charger into the jack labeled DC-in on the TV docking pod. Your pod must always be
powered, even if you do not have your AV500 connected to it. If not powered, your regular tuner’s output (VCR,
cablebox, satellite receiver) will not be seen on your television.
22.3 Connection (2): Breaking your regular TV Connection
22.3 Connection (2): Breaking your regular TV Connection
The TV docking pod is a pass-through device. That is, if you do nothing more than connect it to your VCR, Cable
box, or Satellite receiver and your television, it will pass the audio and video signals through to your TV and you
will notice no difference in how your television system operates. Start by disconnecting your television from its
usual source (vcr, cable box, or satellite receiver).
22.4 Connection (3): Put the TV docking pod between your TV and Tuner
22.4 Connection (3): Put the TV docking pod between your TV and Tuner
We will now put the TV docking pod between these two devices you just separated.
Take one of the AV cables (they are identical, don’t worry), and plug it into the AV Out
jack of the TV docking pod, and plug the other end of this cable into your television
(European users may need to use the included IN labeled scart adapter). Take the
second AV cable and plug it into the AV In jack of the TV docking pod. The other end
of this cable must now go to the video and audio output of your tuner (VCR, cable box,
satellite receiver) that was previously connected to your television (European users
may need to use the included OUT labeled scart adapter). Power the TV docking pod
with the included ARCHOS
adapter/charger.
86
86
TEST IT: Verify that you made the correct connections.
Turn on your television
Turn on your video device (vcr, cable box, or satellite receiver)
• You should be able to use your television system as you normally do. The TV docking pod is merely passing
through the video and audio to your television.
Europe: If you don’t see the video, check to make sure you used the correct SCART IN and OUT adapters.
22.5 Connection (4): Connect the AV 500 to the TV docking pod
22.5 Connection (4): Connect the AV 500 to the TV docking pod
Connect your AV 500 to the pod as shown. The AV 500 can be on or off when you
connect it. If it is off, the act of connecting it to the docking pod will turn it on.
TEST IT: Test now to verify that it works as desired.
Turn on the AV 500 and your television.
Hold down on the TV/LCD button for 2 seconds (button located on top of the AV 500).
The screen on your AV should go black.
You should see the AV 500 screen now displaying to your television.
If not, switch your television to auxiliary input (often called L1 or L2 just below channel 1)
Hold the TV/LCD button again to return to viewing on your AV 500.
43


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Archos av 500 digital mini cam pal at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Archos av 500 digital mini cam pal in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Archos av 500 digital mini cam pal

Archos av 500 digital mini cam pal User Manual - German - 56 pages

Archos av 500 digital mini cam pal User Manual - Dutch - 50 pages

Archos av 500 digital mini cam pal User Manual - French - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info