578728
13
Zoom out
Zoom in
Previous page
1/107
Next page
E-21E-20
English
Continual improvement policy
Arcam has a policy of continual improvement for its
products. is means that designs and specications
are subject to change without notice.
specications
Analogue Audio Output
Digital to Analogue conversion 24-bit 192kHz Delta-Sigma DAC
Signal to noise ratio 110dB CCIR
Harmonic distortion (1kHz) 0.002%
Frequency response (±0.5dB) 10Hz–20kHz
Output level (0dB) 2.2Vrms
Output impedance 47Ω
Minimum recommended load 5kΩ
Video Outputs
HDMI 19-pin HDMI connector Supported video formats are: 720 x 576p,
720(1440) x 576i, 720 x 480p, 720(1440) x 480i, 1280 x 720p, 1920
x 1080i, 1920 x 1080p, 3840 x 2160p. Audio to 8-channel/96kHz or
2-channel/192kHz (24-bit).
Digital interfaces
USB USB 2.0 High Speed (480 Mbit/s)
Network 10 BASE-T / 100 BASE-TX
Physical
Dimensions W433 x D400 x H100mm
Weight 6.2kg nett/8.5kg packed
Power consumption 20W maximum
Digital output connection 75Ω co-axial optical TOSLINK
Supplied accessories
Mains lead CR301 remote control 2 x AAA batteries
Wi-Fi antenna
E&OE
NOTE: All specication values are typical unless otherwise stated
Radio interference
e UDP411 Blu-ray Disc player is a digital device
which has been designed to very high standards of
electromagnetic compatibility.
All Blu-ray players generate, and can radiate RF
(radio frequency) energy. In some cases this can cause
interference with FM and AM radio reception. If this is
the case, keep the player and its connecting cables as far
from the tuner and its aerials as possible. Connecting
the player and the tuner to dierent mains sockets can
also help to reduce interference.
EC COUNTRIES – is products have been designed to
comply with EMC Directive 2004/108/EC.
USA – ese products comply with FCC Part 15 Class B.
Laser radiation
If the UDP411 Blu-ray Disc
player is operated whilst
the outer casing is removed,
invisible laser radiation could
cause eye damage.
CLASS II
LASER PRODUCT
audio
& video
output
formats
Audio output format
e audio output format available from the digital audio
outputs depends on the soundtrack format being played,
the audio output in use and the Digital Out setting in
the Audio settings menu: see ‘Audio’ on page E-17.
Use the owchart on this page to guide you to the
correct setting for your home cinema setup.
Use “PCM 5.1”
START
Do you use an AV receiver?
Use “PCM Stereo”
Do you connect
audio using Optical or
Coaxial Digital?
Do you have a 7.1-format
surround sound speaker
system?
Do you have a surround
sound speaker system?
Use “PCM Stereo”
Use “PCM 5.1”
Use “PCM 7.1”
Use “Bitstream Re-encode”
Do you connect audio using
HDMI?
Is your receiver HDMI1.3
compatible (Dolby
TrueHD/DTS HD)?
Do you want to play
back Secondary Audio
from Blu-ray Discs?
Use “Bitstream HD”
NO
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES YES
YES
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam UDP411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam UDP411 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info