160350
26
Zoom out
Zoom in
Previous page
1/30
Next page
E-26
clock/alarm
Setting the clock and alarm
When Solo Movie 2.1 is in clock mode (POWER light showing red), press MENU to set the clock
or alarms.
Use the left and right buttons on the remote control to select the item to change, then use the
up and down buttons to change the value. For example, after pressing
MENU to enter the clock/
alarm setting menu, pressing up and down will change between setting the clock and setting
one of the alarms.
Solo Movie 2.1 allows up to four different alarms to be set. In this way, different users of Solo
Movie 2.1 can have their personal alarm settings, or you could set up different alarms for
different circumstances (work and holiday periods, for example).
Stopping or pausing an alarm
To stop an alarm ringing, press the power button on the front-panel or remote control.
Alternatively, press
OK to enter ‘snooze’ mode; the alarm will re-sound after a 10-minute delay.
Please note that you must be in AMP, DVD or TUN mode on the CR100 to stop or pause an
alarm from the remote control. To cancel snooze-mode, press the power button.
Sleep timer
This timer allows you to specify a listening period, after which Solo switches automatically into
stand-by. The period can be set in 5-minute intervals, up to 120 minutes (2 hours): a count-
down timer is displayed on the front panel. To set the sleep timer, press the MENU key on the
front panel (or AMP then MENU key on the remote control) to access the Amplifier menu (see
page 15).
Alarms
Remember to set the time-of-day on the clock,
otherwise alarms and countdown sleep timers will
not work!
Retaining clock settings
If Solo Movie 2.1 is turned off at the mains supply,
clock settings are retained for approximately four
days. In the low power consumption ‘hard stand-by’
mode, clock settings are retained indefinitely.






Set 12/24
hour clock
12HR
24HR
Set the time
(hours)
Earlier
Later
Set the time
(minutes)
Earlier
Later
Set the
day
Previous
Next
Confirm
settings
Exit to
time-of-day
display
Clock mode










Exit to
time-of-day
display
Clock mode
Alarms go off at the scheduled time for selected
days. In this example, alarms are set to go
off on Monday, Wednesday and Friday.
Off
On
Set alarm
on or off
Earlier
Later
Set hours for
alarm
Set minutes for
alarm
Earlier
Later
Select a signal source
(DAB only where fitted)
Off
On
Set alarm days on
or off

















Setting the clock
Setting alarms
Setting the front panel clock
The procedure is shown on the diagram below, but
the instructions are:
1. Power off the unit, using the front panel
POWER button, or the remote control
2
button. The light next to the front panel
POWER button glows red, showing that the
unit is in ‘Clock’ mode’
2. Press the remote control MENU button once.
3. Press
B
once to enter the Clock Set
screen.
4. Press
E
to highlight 12HR or 24HR; toggle with
the
BC
cursor keys.
5. Press
E
to move to the hours; adjust with the
BC
cursor keys.
6. Press
E
to move to the minutes; adjust with
the
BC
cursor keys.
7. Press
E
to move to set the day; adjust with
the
BC
cursor keys.
8. Press
E
to move to Set? and confirm with
OK.
Press the
2
button to save and exit the menu.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam solo movie 2 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam solo movie 2 1 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam solo movie 2 1

Arcam solo movie 2 1 User Manual - German - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info