160350
6
Zoom out
Zoom in
Previous page
1/30
Next page
E-6
positioning the unit
< Place Solo Movie 2.1 on a level, firm surface,
avoiding direct sunlight and sources of heat or
damp.
< Do not place Solo Movie 2.1 on top of a power
amplifier or other source of heat.
< Do not place Solo Movie 2.1 in an enclosed space
such as a bookcase or closed cabinet unless there
is good provision for ventilation. Solo Movie 2.1 is
designed to run warm during normal operation.
< Do not place any other component or item on
top of Solo Movie 2.1 as this may obstruct airflow
around the heat-sink, causing Solo Movie 2.1 to
run hot. (The unit placed on top of Solo Movie 2.1
would become hot, too.)
< Make sure the remote-control receiver in the
centre of the front panel display is unobstructed,
otherwise this will impair the use of the remote-
control. If line-of-sight is impractical, a remote-
control repeater can be used with the rear panel
connector (see below).
< Do not place your record deck on top of this
unit. Record decks are very sensitive to the noise
generated by mains power supplies which will be
heard as a background ‘hum’ if the record deck is
too close.
Power
Solo Movie 2.1 is supplied with a moulded mains plug
already fitted to the lead. Check that the plug supplied
fits your supply – should you require a new mains lead,
please contact your Arcam dealer.
Push the IEC (kettle-style) plug end of the power cable
into the socket on the back of Solo Movie 2.1, making
sure that it is pushed in firmly. Plug the other end of the
cable into your mains socket and, if necessary, switch the
socket on.
Solo Movie 2.1 is fitted with a power switch on the
rear panel, above the power inlet: make sure that this is
switched on.
Solo Movie 2.1 is fitted with a transformer designed to
accept the mains voltage in the region that the product
was shipped to. If your mains supply voltage does not
match the specification printed on the rear panel, or you
wish to take the unit to a region with a different mains
voltage, or the mains plug is incorrect, please contact
your Arcam dealer.
Rear panel – version with SCART
connectors and FM/DAB radio (mainly
distributed in Europe)
Rear panel – version with Composite video
connectors and FM/AM radio (mainly
distributed in U.S.A.)
installation
Interconnect cables
We recommend the use of high-quality screened cables
that are designed for the particular application. Other
cables will have different impedance characteristics
that will degrade the performance of your system (for
example, do not use cabling intended for video use to
carry audio signals). All cables should be kept as short as
is practically possible.
It is good practice when connecting your equipment to
make sure that the mains power-supply cabling is kept as
far away as possible from your audio cables. Failure to do
so may result in unwanted noise in the audio signals.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam solo movie 2 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam solo movie 2 1 in the language / languages: English as an attachment in your email.

The manual is 1,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam solo movie 2 1

Arcam solo movie 2 1 User Manual - German - 30 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info