578805
14
Zoom out
Zoom in
Previous page
1/18
Next page
14
Zone numbers
e following zone numbers are dened:
0x01 - Zone number 1. (Zone 1 is the master zone. Commands that are global are addressed to Zone 1)
0x02 - Zone number 2.
0x03 - Zone number 3.
0x04 – Zone number 4.
0x05 – Zone number 5.
0x06 – Zone number 6.
Answer codes
e following answer codes are dened:
0x00 – Status update.
0x82 – Zone Invalid.
0x83 – Command not recognised.
0x84 – Parameter not recognised.
0x85 – Command invalid at this time.
0x86 – Invalid data length.
Example command and response sequence
As an example, the command 0x00, change power state – enter standby:
STR ZONE CC DL Data 1 Data 2 ETR
0x21 0x01 0x08 0x02 0x10 0x10 0x0D
Assuming that the command was accepted by the amplier and is being processed,
the MZ8/MZ12 responds to this command with the following sequence:
STR ZONE CC AC DL Data 1 Data 2 ETR
0x21 0x01 0x08 0x00 0x02 0x10 0x10 0x0D
AMX Duet™ Support
e MZ8 & MZ12 shall be fully compatible with AMX Duet™ Dynamic Device Discovery Protocol (DDDP) e following description of Dynamic Device
Discovery comes from the AMX website (www.amx.com). Dynamic Device Discovery is part of AMXs Duet™ platform, which combines the proven
reliability and power of NetLinx with the extensive capabilities of the Java 2 Micro Edition (J2ME) platform. When integrating a serial or IP device from
a manufacturer embedding the Dynamic Device Discovery Protocol (DDDP), Duet recognizes the device and loads the appropriate Duet module, which
automatically installs the new device. AMXs NetLinx Master can then nd and install the Duet device module either from a library on the master, from
AMXs Web site, or from the manufacturer’s Web site. Duet also allows for device swapping so that programming changes are not required when devices
with DDDP are removed or replaced – a huge benet for end users. e Duet platform is an extension AMX’s InConcert® manufacturer partner program,
which was developed to ensure seamless communication between partners devices and the AMX control system.
Data is specied in the ASCII format. All ASCII characters between the quotes “” should be recognised/transmitted. “\r” is a carriage return (0x0D)
Command: “AMX\r”
Response: “AMXB<Device-SDKClass=Amplier><Device-Make=ARCAM><Device-Model=MZ><Device-Revision=x.y>\r
Where x.y = RS232 protocol version number.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam MZ8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam MZ8 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info