578805
2
Zoom out
Zoom in
Previous page
1/18
Next page
2
is product is designed and manufactured to meet strict quality
and safety standards. However, you should be aware of the following
installation and operation precautions.
1. Take heed of warnings and instructions
You should read all the safety and operating instructions before operating
this equipment. Retain this handbook for future reference and adhere to
all warnings in the handbook or on the equipment.
2. Water and moisture
e presence of electricity near water can be dangerous. Do not use the
equipment near water – for example next to a bathtub, washbowl, kitchen
sink, in a wet basement or near a swimming pool, etc.
3. Object or liquid entry
Take care that objects do not fall and liquids are not spilled into the
enclosure through any openings. Liquid-lled objects such as vases
should not be placed on the equipment.
4. Liing and placing the equipment
is amplier weighs up to 27.5kg, so take extreme care when liing or
moving this unit. We recommend that two people are available to li this
unit.
Only use a rack or shelf that is stable and strong enough to support the
weight of this equipment.
5. Ventilation
Do not place the equipment on a bed, sofa, rug or similar so surface, or
in an enclosed bookcase or cabinet, since ventilation may be impeded.
Keep a minimum of 5cm (2 inches) clear around the apparatus to allow
sucient passage of air.
6. Heat
Locate the equipment away from naked ames or heat-producing
appliances such as radiators, stoves or other appliances that produce heat.
7. Climate
e equipment has been designed for use in moderate climates and in
domestic situations. Unplug this equipment during lightning storms to
prevent possible damage from a strike or mains surge.
8. Cleaning
Unplug the unit from the mains supply before cleaning. e case should
normally only require a wipe with a so, lint-free cloth. Do not use
chemical solvents for cleaning. We do not advise the use of furniture
cleaning sprays or polishes as they can cause permanent white marks.
9. Power sources
Only connect the equipment to a power supply of the type described in
the operating instructions or as marked on the equipment. e primary
method of isolating the equipment from the mains supply is to remove
the mains plug. e equipment must be installed in a manner that makes
disconnection possible.
10. Power-cord protection
Power supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them. Pay
particular attention to the point where they exit from the equipment.
11. Power lines
Locate any outdoor antenna/aerial away from power lines.
12. Speaker connections
Any speakers must be connected to the MZ8/MZ12 using class II wire
(i.e. no connection to Earth should be made). Failure to observe this
precaution may cause the unit to become damaged.
13. Non-use periods
If the equipment is not being used for an extended period, we
recommend that you unplug the power cord of the equipment from the
outlet, to save power.
14. Abnormal smell
If an abnormal smell or smoke is detected from the equipment, turn the
power o immediately and unplug the equipment from the wall outlet.
Contact your dealer and do not reconnect the equipment.
15. Servicing
You should not attempt to service the equipment. Contact your dealer to
arrange servicing.
16. Damage requiring service
e equipment should be serviced by qualied service personnel when:
A. the power-supply cord or the plug has been damaged, or
B. objects have fallen, or liquid has spilled into the equipment, or
C. the equipment has been exposed to rain, or
D. the equipment does not appear to operate normally or exhibits a
marked change in performance, or
E. the equipment has been dropped or the enclosure damaged.
Safety compliance
is equipment has been designed to meet the IEC/EN60065
international electrical safety standard.
is device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) is device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Important safety instructions
MANY OF THESE ITEMS ARE COMMON SENSE PRECAUTIONS BUT, FOR YOUR OWN SAFETY AND TO ENSURE THAT YOU DO NOT DAMAGE THE
UNIT, WE RECOMMEND THAT YOU READ THEM.
CAUTION
RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
RISK OF ELECTRIC
SHOCK DO NOT OPEN
ATTENTION
CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user serviceable parts inside. Refer servicing
to qualified service personnel.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
The lightning flash with an arrowhead symbol within an equilateral triangle, is intended to alert the user to the
presence of uninsulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the product.
CAUTION: In Canada and the USA, to prevent electric shock, match the wide blade of the plug to the wide slot in the socket
and insert the plug fully into the socket.
Class II product
is equipment is a
Class II or double
insulated electrical
appliance. It has been designed
in such a way that it does not
require a safety connection to
electrical earth (‘ground’ in the
U.S.).
Safety Guidelines
2


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam MZ8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam MZ8 in the language / languages: English as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info