161369

Arcam fmj t32 Manual

7
Zoom out
Zoom in
Previous page
1/72
Next page
E-5
English
VOLTAGE SELECT
AUDIO OUT
POWER INLET
L
R
1 2
L
R
AUX
IN
DAB
SIRIUS
FM 75½
GND AM LOOP
REMOTE
IN
RS232PROGRAM
OFF/ON
O I
220-240V
~50Hz
110-120V
~60Hz
Analogue audio outputs
Connect these to your amplier’s tuner (or other line-
level) input using suitable high quality interconnect
cables. Ensure that the le and right audio outputs
from the T32 are connected to the corresponding le
and right inputs on your amplier.
e second set of sockets can be used to connect to
a second amplier set up for multi-room use, or for
direct recording.
Power inlet
Connect the correct
mains cable here.
Voltage select
Ensure the voltage selected matches
the local power supply.
Remote in
is allows remote-control
signals to be received by the T32
if the remote sensor is covered or
otherwise ‘invisible’ to the remote
control (see page 4).
Mains switch
is switch isolates the unit from
mains power. e unit can be
placed in low power standby using
the STANDBY button on the front
panel or
P
on the remote control
Program switch
For use by your Arcam dealer
during installation of soware
updates.
Aux input
is socket can either be used in conjunction with the
RS232 port for the connection of an rDock, or as a
standard line level input (see page 13).
DAB aerial input (if tted)
is input can be used with the ribbon aerial
provided, or connected to an external aerial (of the
correct type) if required.
Sirius input
is input is for a SiriusConnect™ Home Tuner
module. Sirius is a subscription radio service that is
available throughout North America.
FM aerial input
is input can be used with the ribbon aerial
provided, or connected to an external aerial (of the
correct type) if required. In Europe, a Belling-Lee
connector is used; in North America, an F-type
(screw) connector is used.
AM aerial input
Connect the two AM Loop aerial
leads – they are not polarised. In
addition, a 3m–5m external wire
can be xed to AM LOOP to improve
reception (see page 9).
RS232 control
is is used for connecting an rDock or rLead for
iPod® control (see page 6), or for controlling the T32
from a remote computer.
Your Arcam dealer can provide a copy of the RS232
remote control protocol if required.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam fmj t32 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam fmj t32 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info