Manual Arcam FMJ CD23 (page 7 of 8) (English)

578794

Zoom out

Zoom in

1/8

English

Using the remote control

CR-314

RPT CLEAR

PROG

A-B

DISP

DVD

OPEN

MUTE

MODE

CD/DVD REMOTE

CD DVD

SUBT

ZOOM AUDIO MEM RTN

ANGLE SETUP STATUS SRCH

TITLE

NOTE

Remember to install the two AAA batteries supplied

before trying to use your remote control.

Do not place anything in front of the FMJ badge on

the top left of the CD player (where the IR receiver is

located), or the remote control may not work.

Note that greyed-out buttons on the remote control

are DVD-specific and are not used with the CD

player.

CD/DVD

Ensure that CD mode is selected using the CD/DVD toggle

button. The ‘CD’ LED above the CD/DVD button is lit

briefly when CD mode is selected.

0–9 KEYPAD

This allows direct access to individual tracks on the

disc. To select a track, press the corresponding keypad

button and then press . For tracks greater than

9, enter the digits in sequence. For example, to play

track 15, press and hold 1, then press 5.

CLEAR

If you make a mistake whilst programming you can

delete the last entered track by pressing ‘CLEAR’.

To delete all the programmed tracks press ‘CLEAR’

repeatedly until ‘0’ is displayed.

To exit the program facility, press ‘PROG’.

PROG

You can program a selection of up to 24 tracks from

a disc to play in any order. Select a track by using the

and buttons, then press ‘PROG’ to program

the track into memory (‘PROGRAM’ appears on the

display to indicate that you have started programming

a sequence). Repeat these steps to program the

remaining tracks in your selection. Alternatively, press

‘PROG’ once and enter your track selection using the

0–9 keypad.

The display shows the track numbers programmed,

the total length of the programmed sequence and

the number of tracks programmed (shown by a

number below the word ‘STEP’).

Each time you enter a track, the number below ‘STEP’

increments by one and flashes until you press ‘PROG’

to confirm. If you fail to press ‘PROG’ within about five

seconds, the display stops flashing and you will have

to reselect the track.

Press ‘

’ to play the program. Press ‘ ’ again to

replay the entire sequence from the start. Press and

hold ‘CLEAR’ to erase the programmed sequence.

Press ‘PROG’ again to exit the program facility: the

display flashes ‘CONTINUE’ and shows ‘0’.

MUTE

Stops sound to the speaker outputs of certain Arcam

amplifiers.

VOLUME +/–

Adjusts the volume on Arcam remote-controllable

amplifiers.

Note that the volume ‘+/–’ controls and ‘MUTE’

button have no effect on the audio output level of

the CD players.

A–B

This button enables you to repeat any section of music

within a track. Whilst the disc is playing, press the ‘A–B’

button at the start of the section you wish to repeat.

‘REPEAT’ is shown on the display and the letter ‘A–’ flashes.

Press the button a second time when you reach the end

of the section you wish to repeat. The ‘A–B’ letters stop

flashing and remain lit. This section will repeat until you

press ‘ ’ or ‘ ’ or ‘ ’. The forward search button ( )

moves forward within the selected loop.

RPT

To repeat the entire CD or a pre-programmed selection

of tracks press ‘RPT’ once: ‘REPEAT’ lights on the display. To

repeat a particular track, select that track and then press

‘RPT’ twice so that ‘REPEAT 1’ is shown on the display.

If you now select a different track, that track is repeated

instead.

To cancel the repeat function press ‘RPT’ a third time.

SKIP AND SEARCH TRACK

Skip track backwards and forwards; Search backwards and

forwards.

OPEN

Opens and closes the CD tray

PLAYBACK CONTROL

Pause, Play and Stop

P MODE

Press once to shuffle play CD tracks (i.e. play them in a random

order). Press again to cancel shuffle play.

DISP

Turns the display on or off. Turning the display off generally

produces a slight improvement in sound quality.

TITLE

Press ‘TITLE’ once to display the remaining time of the currently

playing track. Press again to display the time remaining of

the disc. Press a third time to turn the text display on.

Press ‘

TITLE’ again and the display reverts to its original setting,

showing the time elapsed for the current track.

For CDs with text, pressing ‘

TITLE’ once while the disc

is loaded but not playing displays the artist’s name.

Pressing ‘

TITLE’ a second time displays the total number of

tracks and the total playing time.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam FMJ CD23 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam FMJ CD23 Manual

Product: