578789

Arcam FMJ AV8 Manual

6
Zoom out
Zoom in
Previous page
1/42
Next page
E-6
E-6
E-7
English
DIGITAL AUDIO INPUTS
bp
DVD,
bq
AV,
br
TAPE,
bs
TUNER,
bt
CD,
ck
VCR,
cl
SAT.
Connect these inputs to the digital ouputs of your available source
equipment.
bs bt ck clcm
OUT TUNER CD VCR
SA
T
TAPE
AV
DVD
bp bq br
DIGITAL INPUTS
Notes:
Each of these seven digital inputs can be individually allocated to
different audio inputs if required, by use of the ‘Digital Settings’
page of the Setup menu.
The AV8 does not contain an RF decoder for Laserdisc with RF
output.
DIGITAL OUTPUT
cm
(Digital) OUT. Connect this coaxial digital output to your digital
recording device such as a CD-R, digital VCR or minidisc player.
When a digital source is selected, the digital output will send an exact
copy of the incoming digital signal. For example, for a 5.1 digital source,
the digital output will also be in 5.1 format.
On selecting an analogue source, the digital output will send an SPDIF
format digital signal, encoded with the analogue source material, with
one exception: if Neo:6 Cinema or Music mode is selected, the digital
output will be muted due to the extra processing required for these
modes.
MULTICHANNEL DVD-A/SACD INPUTS
The multichannel input is suitable for use with sources that decode the
surround channels internally, such as DVD-A or SACD players.
The AV8 switches these analogue inputs directly to the analogue
outputs via its own volume control circuit. This direct path maintains
the best possible sound quality for DVD-A and SACD sources.
cn
LEFT,
co
RIGHT,
cp
CENTRE,
cq
SUB,
cr
L SURR,
cs
R SURR.
Connect these input sockets to the equivalent audio outputs of your
DVD-Audio or SACD player.
ct
LS BACK, and
dk
RS BACK. These are available for formats
requiring eight channels. Currently no formats are available requiring
these connections, which are provided for future compatibility.
AUDIO CONNECTIONS
Take care to place the audio cables as far from any power supply cabling
as is practically possible to reduce hum and noise problems.
Connect the analogue outputs from your source devices such as a
DVD player to the analogue inputs as shown:
AUX/
PHONO
MM
MC
TUNER AV SAT DVDCD OUT IN
TAPE VCR
IN
AUDIO
L
R
OUT
6 8 9 bk bl bm
bn
bo
543 7
GND
ANALOGUE AUDIO INPUTS
3
TUNER,
4
CD,
6
TAPE 1N,
8
VCR IN,
9
AV,
bk
SAT,
bl
DVD. Connect the left and right inputs to the left and right outputs
of your source equipment.
bm
AUX/PHONO. Unless the optional phono card has been installed,
this input will function identically to the other line inputs. For example
it can be connected to a second CD player.
With the optional phono card installed this input can be connected
directly to a record deck. This card is available from your Arcam dealer
and caters for both moving magnet and moving coil cartridges.
bn
MM/MC Switch. The switch on the back panel marked MM/MC is
used to select the correct sensitivity to match the cartridge fitted to
the record deck, which is either moving magnet (MM) or moving coil
(MC).
If you are unsure which type of cartridge is fitted to your record deck,
connect the record deck and select the ‘MM’ setting on the switch. If,
when tested, the output from the record deck is very quiet compared
with the CD or DVD inputs then your cartridge is probably a moving
coil type cartridge. Turn the AV8 off and select the ‘MC’ setting on the
switch and test the record deck again.
Please note that if the AV8 is set to ‘MM’ and the record deck has a
‘MC’ cartridge fitted, testing these together will not cause any damage
to either the AV8 or the record deck.
bo
GND. This is the phono earth or ground terminal and is used to
connect to a turntable earth lead (if fitted). Note that this terminal must
not be used as a safety (mains) earth.
ANALOGUE RECORD OUTPUTS
5
TAPE OUT,
7
VCR OUT. Connect the left and right audio
outputs sockets to the left and right input sockets of your cassette deck
or VCR (usually labelled ‘RECORD’). The VCR connections may also be
used for a second tape deck.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam FMJ AV8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam FMJ AV8 in the language / languages: English as an attachment in your email.

The manual is 0,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info