65473

Arcam DV79 Manual

29
Zoom out
Zoom in
Previous page
1/42
Next page
DV79
E-28
English
DV79
E-29
Command Specications / Spécications des commandes /
Befehlsspezikationen / Opdrachtspecicaties
Power / Alimentation / Betriebsbereitschaft / Stroom
Change the stand-by state of the DV79.
Permet de modier l’état de veille du DV79.
Ändern des Stand-by-Zustands des DV79.
De standby-status van de DV79 wijzigen.
Example / Exemple / Beispiel / Voorbeeld
Command/response sequence to bring the DV79 out of standby:
Séquence commande/réponse pour désactiver le mode veille du DV79 :
Befehls-/Rückmeldesequenz zur Aktivierung des im Stand-by-Modus
bendlichen DV79:
Opdracht- en responsreeks om de DV79 uit stand-by te halen:
COMMAND: !*1~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
RESPONSE: !*A1~~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
Display Control / Contrôle de l’afchage /
Steuerung des Displays / Bediening display
Allows the brightness of the front-panel display to be changed.
Permet de modier la luminosité de l’afchage du panneau avant.
Hiermit können Sie die Helligkeit des Displays an der Gerätevorderseite
ändern.
Hiermee kan de helderheid op het display aan de voorkant gewijzigd
worden.
Example / Exemple / Beispiel / Voorbeeld
: Command/response sequence to change the brightness of the display
to ‘off’
: Séquence commande/réponse pour désactiver la luminosité de
l’afchage :
Befehls-/Rückmeldesequenz, mit der der Helligkeitsstatus des Displays
auf „aus“ gesetzt wird:
Opdracht- en responsreeks om de helderheid van het display op ‘off’ te
zetten:
COMMAND: !+0~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
RESPONSE: !+@0~~ – followed by/suivie d’un/gefolgt von/gevolgd door (0xD)
COMMAND:
Byte: Description:
CC ‘+’ (0x2B) (Command code)
P1 ‘0’ (0x30) – Set the display to off
‘1’ (0x31) – Set the display to dimmed
‘2’ (0x32) – Set the display bright
‘Q’ (0x51) – Request the display brightness
P2 ‘~’ (0x7E) – (Reserved)
RESPONSE:
Byte: Description:
RC ‘+’ (0x2B) (Reply Code)
AC Answer code
P1 ‘0’ (0x30) – The display is off
‘1’ (0x31) – The display is dimmed
‘2’ (0x32) – The display is bright
P2 ‘~’ (0x7E) – (Reserved)
P3 ‘~’ (0x7E) – (Reserved)
COMMAND:
Byte: Description:
CC ‘*’ (0x2A) (Command code)
P1 ‘0’ (0x30) – Enter stand-by state
‘1’ (0x31) – Power-on
‘Q’ (0x51) – Request power state
P2 ‘~’ (0x7E) – (Reserved)
RESPONSE:
Byte: Description:
RC ‘*’ (0x2A) (Reply Code)
AC Answer code
P1 Response to the ‘Request power state’:
‘0’ (0x30) – DV79 is in standby
‘1’ (0x31) – DV79 is powered on
Otherwise:
‘~’ (0x7E) – (Reserved)
P2 ‘~’ (0x7E) – (Reserved)
P3 ‘~’ (0x7E) – (Reserved)
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DV79 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DV79 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info