138743
18
Zoom out
Zoom in
Previous page
1/24
Next page
DV135
E-18
The HDMI interface
If you have a HDMI- or DVI-equipped monitor or display, you can connect it to the DV135 using a HDMI
cable. The HDMI connector carries uncompressed digital video, as well as digital audio.
About HDMI
HDMI (High Denition Multimedia Interface) supports both video and audio on a single digital connection
for use with DVD players, digital TV, set-top boxes, and other AV devices. HDMI was developed to
combine the technologies of High-bandwidth Digital Content Protection (HDCP) and the Digital Visual
Interface (DVI) in one specication, with the addition of transmission of digital audio information; HDCP
is used to protect digital content transmitted to DVI-compliant displays.
HDMI has the capability to support standard or high-denition video, together with stereo or multi-
channel surround-sound audio. HDMI features include uncompressed digital video, one connector
(instead of several cables and connectors), and communication between the AV source and AV devices.
Connecting using HDMI
If the HDMI connector is to be used, we recommend rst setting the ‘Main video output’ item on the
video menu page to ‘HDMI. This will give full ‘plug and play’ functionality. See page 14 for details on how
to do this.
Use a HDMI cable to connect the HDMI socket on this player to a HDMI socket on a compatible display
device or receiver. The arrow on the cable connector body should be face up for correct alignment with
the connector on the DV135. If the DV135 has been congured to ‘HDMI’, then the DV135 will congure
its video output automatically to match the capabilities of the attached HDMI device.
NOTE: A HDMI connection can be made only with HDMI or DVI-equipped components compatible
with both DVI and HDCP. Note that if you choose to connect to a DVI device, you will need an adaptor
(HDMI to DVI) to do so; a DVI/HDCP connection, however, does not support audio signals.
If you require further information on the possibilities for connecting your DV135 to your DVI/HDMI
equipped display device, please contact your Arcam dealer.
Troubleshooting
Problems with video

<
Check that the HDMI cable is connected correctly at both ends. If an HDMI-equipped A/V
receiver is in use, try connecting the DV135 directly to the display device, in order to isolate
where the fault may lie.
<
Check that the display device is set to display the HDMI input (i.e., has not been set to some
other video input, instead).
<
Check that the HDMI input of the receiver and/or display device is enabled. See the user
handbook of the connected device for details on doing this.
<
Using an alternative video display device (e.g., connected via the composite video out), check
that the ‘Main Video Output’ item on the Video page of the Set-up menu is set to ‘HDMI’. See
page 14 for details on how to do this.
<
Consult the user handbook of the display device to ensure that it can handle at least one of the
following output formats provided by the DV135:
720 x 576p 1280 x 720p 1366 x 768p
720 x 480p 1920 x 1080i

Random noise will be displayed if the content-protection algorithm fails to authenticate the attached
device. This will occur, for example, if a DVI device that does not support HDCP (such as a computer
monitor) is connected to the DV135.
To attempt to isolate this problem, remove all discs from the DV135, then power-off both the DV135 and
the connected display device. Switch the display device on, then the DV135 – at this point, the idle logo
of the DV135 should be shown on the display device. If this is not the case, please check the items listed
above for a blank screen.
If the noise appears when a copy-protected disc (DVD) is played, then it is the authentication that is
failing. Please contact your dealer for further information.
Problems with audio
The type of audio provided by the HDMI connector depends on the conguration of the DV135 (see
Audio Set-up’ on page 14). Note that pure DVI devices (connections requiring a HDMI to DVI convertor
cable) do not support audio via this connection.
Note that for audio to be transmitted over HDMI, ‘Digital Audio Output’ must be set to ‘HDMI (Auto)’
– see page 14.
The DV135 supports HDMI version 1.0: this means that it does not support discrete multi-channel audio
over HDMI. Dolby Digital multichannel audio and two-channel stereo is supported.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam dv 135 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam dv 135 in the language / languages: English as an attachment in your email.

The manual is 0,9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info