578758

Arcam DiVA P80 Manual

10
Zoom out
Zoom in
Previous page
1/15
Next page
A80/P80
10
English
A80/P80
11
Connecting to power, loudspeakers and
other equipment
Follow the installation instructions for the amplier on pages
4–6.
AUDIO IN
Connect this input to the output sockets of your pre-amplier or
the PRE OUT sockets of an amplier.
MONO LINK
The power amplier can be adapted to provide two mono
loudspeaker outputs from a single input. Pull out the link
supplied and use it to connect the L and R AUDIO OUT sockets
together. Using one power amplier per loudspeaker will enable
you to bi-amplify bi-wireable loudspeakers.
This is particularly benecial for top quality stereo installations
with a separate pre-amplier, or where ampliers are provided
for the left, centre and right channel loudspeakers in a ve
speaker Dolby Pro Logic or Dolby Digital system.
Contact your Arcam dealer for more information.
‘Daisy chaining’
The power amplier can be connected to further power
ampliers to drive more speakers (e.g. those in other rooms or
tri-amplied speakers, etc).
Connect the extra power amplier inputs to the AUDIO OUT
sockets on the power amplier, left to left, right to right.
Installation: P80 power amplifer
Remote switching
By making a connection from the REMOTE IN socket of the P80
power amplier to the TRIG OUT socket of the A80 amplier,
you can use the A80 to switch the power amplier on and off.
If congured in this way, the front panel POWER button of the
A80 (or the POWER/STANDBY button on the remote control)
switches both ampliers on and off together. This facility allows
you to conceal the power amplier yet still control it.
The connecting cable required is a male 3.5mm to male 3.5mm
jack lead (stereo or mono) and it is possible to connect several
power ampliers to an A80 by ‘daisy chaining’ from TRIG OUT of
one P80 into the REMOTE IN of the next.
Signal detect
The P80 power amplier features a signal-detecting circuit
that automatically switches the unit on when an input signal
is delivered to the amplier. The unit switches into standby
approximately 12 minutes after the signal source is switched
off.
The signal detect feature is disabled by the supplied blank plug,
or when a connection from the REMOTE IN socket to TRIG OUT
of an A80 is made. Simply remove the blank plug from the
REMOTE IN socket if you wish to use this feature.
LR
+ –+ –
SP1
SP2
4 – 16 OHMS
L
R
IN
OUT
REMOTE
IN
TRIG
OUT
AUDIO
LINK
POWER INLET
VOLTAGE
SELECT
115/230V
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA P80 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA P80 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,63 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info