578780
4
Zoom out
Zoom in
Previous page
1/12
Next page
DT81
4
Installation
DT81 rear panel
1
Voltage indicator
2
Socket for IEC power inlet line
3
Remote control, in and out mini-jacks
4
FM tuner input
Positioning the unit
Always place the tuner on a level, rm surface.
Setting up the aerial
Your new Arcam tuner is capable of superb reception but only if
it is receiving a good quality transmission signal.
We recommend that a roof mounted aerial is used where
possible, to ensure the best performance. Use a Band III (multi-
element Yagi) array if you are a long way from a transmitter, or
use an omnidirectional or folded dipole aerial if you are close to
more than one transmitter. In the U.K. this should be mounted
with all elements vertical as the transmissions are vertically
polarised. Be sure to use a good quality coaxial cable such as
URM43, CT-100 or similar. For Band III use you can use either
50 or 75 cable provided it is good quality. Always use 50
cable for L-band use.
If the signal is strong the supplied indoor aerial may be
suf cient. It should be hung on a wall with both wires fully
stretched out vertically. However there will be many areas
where one DAB ensemble (i.e. a group of stations transmitted
together) is strong and others are weak. An external aerial is
desirable in these cases in order to receive a higher number
of services. If the DAB services in your area are transmitted
on L-band (1.5GHz) then consult your dealer with regard to the
best aerial to use.
NOTE: The supplied indoor aerial is suitable only for Band
III, not L-band. An aerial is not supplied in US or Canada.
There is a small aerial made by Bosch which is suitable for
L-Band and Band III and has been used with good results. The
Bosch part number is: F01DE00144
Robert Bosch Multimedia-System GmbH & Co. KG
Dept. MU/VMK
Postfach 77 77 77
D-31132 Hildesheim
Telephone: +49 5121 49 4525
Fax: +49 5121 49 2150
Email: ml_mu_support@fr.bosch.de
Internet: www.boschmultimedia.de
230 V
COAX
OPTICAL
POWER INLET
DIGITAL OUT
L
R
AUDIO OUTPUTS
1
2
REMOTE
CONTROL
IN
OUT
FM TUNER
INPUT
L
R
DATA SERVICE
RDI
OUT
AERIAL
INPUT
43 57681 2
5
Audio output phono sockets, two pairs
6
Data Service on/off switch and RDI output
7
Digital audio output, coaxial and TOSLINK
8
Aerial input, BNC locking coaxial
Aerial input socket
The coaxial cable from the aerial should be tted with a 50
BNC plug. Connect this to the aerial socket on the back of this
tuner, turning to lock in place.
Connecting to other equipment
Interconnect cables
Interconnecting cables are not supplied with this tuner. We
recommend high quality cables as inferior quality cables will
degrade the sound quality of your system. Please contact your
Arcam dealer for details of suitable cables.
Digital outputs
Optical and co-axial digital audio outputs are provided. These
can be connected to an external DAC (Digital to Analogue
Converter) in order to enhance the audio potential of this tuner.
They can also be used to connect this tuner to a digital
recording device (such as a CD-R or Minidisc recorder) for
direct recording.
NOTE: The digital output data includes Serial Copy
Management System (SCMS) codes. This allows you to make
one generation of digital recording but further digital copies
will be prevented.
AM/FM tuner audio input
The audio output from a conventional tuner can be connected
here to save an input on the ampli er. When this tuner is
switched off or is set to bypass mode, this input is routed
straight to the audio output of this tuner.
Remote control in/out
If you are using this tuner with an ampli er that also features a
remote bus (such as the Arcam Diva A85 or FMJ A22) you can
connect the REMOTE OUT of the ampli er to the REMOTE IN of
the tuner using a 3.5mm jack lead.
This allows the tuner to be positioned out of sight while still
offering remote control as commands are passed through the
ampli er. It can also be used to route control signals for multi-
room use.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA DT81 DAB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA DT81 DAB in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info