578767
11
Zoom out
Zoom in
Previous page
1/19
Next page
AVR200
11
English
1 INPUT SETTINGS
2 CHANNEL BALANCE
3 CHANNEL DELAYS
4 SPEAKER SETTINGS
5 EXIT
SETUP SPEAKER SETTINGS
MAIN : LARGE
CENTER : LARGE
SURROUND : LARGE
SUBWOOFER : ON
SUBWOOFER STEREO: ON
DO NOT SAVE AND EXIT
SAVE AND EXIT
Speaker settings page
The size and number of loudspeakers are de ned on this page
of the OSD.
A LARGE speaker is one that is capable of handling a full
range signal (i.e. 20Hz20kHz).
A SMALL speaker is one that is not capable of
reproducing a deep bass signal (i.e. below 100Hz), for
example a satellite speaker.
ON is used when a speaker is present and active and
receives the intended audio information.
OFF is used when a speaker is absent or inactive. Audio
signals intended for speakers set to OFF are redirected to
the main speakers.
Recommended speaker settings for different systems
To con gure a Sub/Sat system (i.e. a set of small speakers
with a subwoofer), your speaker settings should be SMALL for
all speakers, with Subwoofer turned ON.
Some small but high performance speakers are capable of
handling a signal below 100Hz: in this instance, set them to
LARGE (despite their small physical size). If in doubt, please
check the speci cations in your speakers handbook or ask your
dealer.
If you dont have a centre speaker, set CENTER to OFF. This
directs the centre speaker information to the front left and right
speakers, ensuring that dialogue is clearly reproduced.
The SUBWOOFER STEREO setting is only relevant for music
reproduction and does not affect sound reproduction for movies.
If you have small speakers on the front, set SUBWOOFER
STEREO to ON to give the extra bass reinforcement required
for music. If your front speakers are large, or of high quality and
performance, you may nd music is reproduced more accurately
with the Subwoofer turned OFF.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA AVR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA AVR200 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info