578767

Arcam DiVA AVR200 Manual

10
Zoom out
Zoom in
Previous page
1/19
Next page
AVR200
10
To calculate these delay times, fi rst measure (or estimate)
the distances from the listening position to the front, centre
and rear speakers. Keep a record of these distances by
entering them under the heading ‘Your measurement’ in the
table provided.
The centre channel delay is calculated by subtracting the centre
channel distance from the front left (or right) distance. The
difference represents the
CENTRE delay time.
The rear channels’ delay time is calculated by subtracting the
rear left (or right) distance from the front left (or right) distance.
The difference represents the
REAR delay time. Note that if your
rear loudspeakers are further from the listening position than
the front loudspeakers, you should set this delay to 0ms.
If you have made your measurements in feet, one foot
approximates to one millisecond (1ms) delay. If you have made
your measurements in metres, one metre approximates to three
milliseconds (3ms) delay.
When playing a Dolby Pro Logic or Dolby Pro Logic II source
you can set a time delay (in milliseconds) for the rear channels.
There is no delay setting for the centre channel.
The rear channel delay in Dolby Pro Logic is calculated by
adding 15ms to the rear channel delay calculated for Dolby
Digital. In our example, this is 15ms + 6ms = 21ms.
Distance to listening position e.g. Your
measurement
Front left or right 4m or 12ft ---------------------
Centre 3m or 9ft ---------------------
Rear left or right 2m or 6ft ---------------------
Difference e.g. Delay (ms)
CENTRE delay (4 – 3m) or (12 – 9ft)
= 1m or 3ft 3 milliseconds
REAR delay (4 – 2m) or (12 – 6ft)
= 2m or 6ft 6 milliseconds
CHANNEL DELAYS
CENTER N/A
REAR 21ms
DO NOT SAVE AND EXIT
SAVE AND EXIT
e.g. 3m
(9ft)
e.g. 4m
(12ft)
e.g. 2m
(6ft)
centre
front
left
front
right
rear
left
rear
right
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA AVR200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA AVR200 in the language / languages: English as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info