578756

Arcam DiVA A70 Manual

7
Zoom out
Zoom in
Previous page
1/12
Next page
English
A70
E-7
Recording
With the Arcam A70 it is possible to listen and to record from one source, or to listen to one source while
recording another.
The record signal is sent to the TAPE output sockets. These sockets are suitable for use with almost any
type of recorder (cassette, CDR, MD, VCR, reel-to-reel, etc.).
To record the currently selected source, press the SELECT button to enter the menu system. Rotate the
Control knob clockwise until the display shows ‘REC OUTPUT’. Press SELECT. ‘REC’ is displayed, followed by
the current setting. Rotate the Control knob counter-clockwise until ‘REC SOURCE’ is displayed. After a few
seconds, the display reverts to showing the volume level and you are ready to record.
To listen to one source whilst recording another, press the SELECT button to enter the menu system.
Rotate the Control knob clockwise until the display shows ‘REC OUTPUT’. Press SELECT. ‘REC’ is displayed,
followed by the current setting (for example, ‘REC TUNER’). Rotate the Control knob until the desired
source is displayed. After a few seconds the display reverts to showing the volume level and you are
ready to record.
The unit now sends the selected source (‘Tuner’ in the example above) to the TAPE OUT sockets while
you listen to the same or an alternative source.
TAPE button operation
5
To play back the recording from a cassette deck attached to the TAPE input, press TAPE. ‘TP–’ followed
by a two-letter abbreviation of the record out source is shown on the display (e.g. ‘TP–CD’). Selecting this
input overrides the other source selectors.
If the current record out is set to ‘REC SOURCE’ then the previous selected source is shown on the display.
Pressing different source buttons on the front panel only changes the record output.
Tape mode can be exited by pressing TAPE again.
It is also possible to monitor a recording while it is being made, provided your cassette deck is a 3-head
type. To do this, press TAPE. Switching this button in/out allows an A/B comparison between the source
signal and the recorded signal.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam DiVA A70 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam DiVA A70 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info