Manual Arcam CDS27 (page 8 of 69) (English, German, Dutch, French, Italian, Spanish)

578729

Zoom out

Zoom in

1/69

E-11E-10

English

NOTE

e CR902 is a multi-device remote, therefore key

functions will dier according to the last input

button pressed.

Please ensure “CD” button is selected prior to

controlling the CDS27.

settings

menus

Navigating the menus

e CDS27 menus can be navigated by using the cursor

(arrow) keys on the remote control.

1. Use the

and

keys to navigate up and

down the current menu.

2. With the main section you require displayed,

press OK to select it.

3. Use the

and

keys to navigate up and

down the options.

4. Pressing

selects a setting: use the

and

keys to change the setting.

5. Press OK to conrm the setting. Go back to step 4

to adjust any other settings in the current section.

6. Press

to return to the previous screen if you

want to select another section to adjust.

Firmware Update – You can check for an upgrade to

your player’s rmware by selecting this menu item and

pressing OK to highlight ‘Network’, then press OK again.

A message appears if no new rmware is available,

otherwise follow the on-screen instructions.

Load Defaults – Press OK with this item highlighted to

reset all settings to factory defaults.

You are asked to conrm that you want to load the

factory default settings. Select “cancel” to exit or

highlight the “yes” option and OK to conrm.

System Information – Use the

cursor keys to

browses through options.

e System Information panel shows information

about your player, such as the IP address and rmware

version.

Network Audio - Allows the user to enable or disable

the UPNP rendering capability of the player. Setting

this option to ‘o’ will disable network audio.

Digital Output - Allows the user to limit the sample rate

of the coax/optical digital output.

Network Standby – is item determines whether

network features are available when the CDS27 is in

standby.

Selecting “ACTIVE” will maintain the network

connection (required for IP control).

Selecting “STANDBY” willl allow the network

hardware to be powered down in order to reduce power

consumption.

Network Setup– is item allows the user to congure

the unit to join an existing network, required for

network audio playback and over the internet soware

updates.

Auto Standby – Allows user to speciy the period of

inactivity aer which the unit will automatically enter

standby. e options are: 5/10/15/20/25/30 Minutes.

Disc Auto Playback – controls whether an optical disc

(e.g. CD) will play automatically aer it is inserted.

< On: Optical discs will play automatically.

< O: play must be pressed to play a disc.

e Settings menu allows you to congure all aspects

of your CDS27. is section will go through the menu

items and explain their function.

e only way to view the Settings menu is on the

CDS27 display screen.

Entering the settings menu

If the home menu is not currently displayed, press

MENU on the remote control to display it.

Press

until the SETTINGS MENU item is displayed

and and press OK

to enter.

AMP Device Mode

e

Device Mode button congures the CR902 to

control your Arcam amplier. Pressing this button does

not aect the currently selected input on the amplier.

Toggles power between standby and on

DISP

Cycles through the front panel display’s

brightness options

MODE

Cycles through the display modes on the

front panel

Displays the amplier setup menu on the

front panel

Navigate menus

conrms a selection

Toggles the mute function of the amplier

Vol-

Vol+

Vol +/– adjusts the volume of an Arcam

amplier up or down.

Press the MUTE button once to mute an

Arcam amplier. Press again (or use Vol +/–)

to un- mute.

SP1

Toggles Speaker 1 output

SP2

Toggles Speaker 2 output

BAL

Adjusts the balance between the le and

right audio channel

TUN Device Mode

e

Device Mode button congures the CR902 to

control the tuner functions of Arcam tuners.

Toggles power between standby and on

0…9

e numeric keys are used to store and

recall presets

DISP

Cycles through the front panel display’s

brightness options

INFO

Cycle through dierent information

display modes

)

Rewind iPod

(

Fast forward iPod

]

Preset down/Sirius category down/iPod

track back

[

Preset up/Sirius category up/iPod track

forward

Stop iPod

Play/pause iPod

Displays the tuner setup menu on the front

panel

' ,

Preset up/down, iPod track back/forward

< >

Decrement/increment tuning frequency

Conrm a selection

FM MONO

Toggle FM mode between mono and

stereo reception

P/TUNE

Enter/Exit Preset recall mode

STORE

Enter/Exit Preset store mode

BAND

Cycles through available tuner bands

CD Device Mode

e

Device Mode button congures the CR902 to

control the CD functions of Arcam CD players.

Toggles power between standby and on

Open/close disc tray

0…9

e numeric keys allow direct access to

individual tracks on a disc. To select a track

press the corresponding keypad button.

For tracks greater than 9, enter the digits

in sequence. For example, to play track 15,

press

, then press

DISP

Cycles through the front panel display’s

brightness options

MODE

Changes the available display modes on the

CD player

)

Fast rewind

(

Fast forward

]

Skip back to the start of the current/

previous track

[

Skip forwards to the start of the next track

Stop playback

Play

Toggles pause of playback

Enter a track in a programmed track list

Navigates track listings if supported by the

player

selects the currently highlighted track if

supported by the player

SHUFF

Toggles random (‘shue’) play on and o

RPT

Repeat track will cause the current track

to be played once the end of that track has

been reached.

Repeat all will repeat the current section

of tracks once the end of the nal track has

been removed.

To repeat a particular track, select that

track and press RPT twice. To cancel, press

RPT a third time

SACD

Toggles between selecting the HD and CD

layer of SACD disc

BD Device Mode

e

�

Device Mode button congures the CR902 to

control the BD functions of Arcam BD players.

Toggles power between standby and on

Open/close disc tray

0…9

e numeric keys allow direct access to

individual tracks on a disc. To select a track

press the corresponding keypad button.

For tracks greater than 9, enter the digits

in sequence. For example, to play track 15,

press

, then press

DISP

Cycles through the front panel display’s

brightness options

MODE

Changes the available display modes on the

BD player

)

Fast rewind

(

Fast forward

]

Skip back to the start of the current/

previous track

[

Skip forwards to the start of the next track

Stop playback

Play

Toggles pause of playback

AUDIO

Changes audio decode format (Dolby

Digital, DTS, etc.).

Activates BD player menu.

Navigates track listings if supported by the

player

selects the currently highlighted track if

supported by the player

Returns navigation to the top level of the

menu (‘Home’).

RTN

When navigating a menu, press this key to

return to the previous screen or selection

SHUFF

Toggles random (‘shue’) play on and o

RPT

Repeat playback of the disc or pre-

programmed selection of tracks. To repeat a

particular track, select that track and press

RPT twice. To cancel, press RPT a third time.

SACD

Toggles between selecting the HD and CD

layer of SACD disc

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam CDS27 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam CDS27 Manual

Product: