482342

Arcam AVR600 Manual

53
Zoom out
Zoom in
Previous page
1/74
Next page
E-51
English
Sirius satellite radio
(AVR600, US & Canada only)
In this section it is assumed that you already have
a ‘SiriusConnect™ Home Tuner’ kit and a Sirius
subscription, and that the antenna is already correctly
placed to receive Sirius broadcasts. Please visit
www.sirius.com for more information.
Add to your subscription
Before being able to receive satellite radio broadcasts
you will need to update your Sirius subscription to add
the ID number of the Sirius receiver module in your
AVR600. e Sirius ID can be found by switching to
the Sirius source and selecting channel 0. e AVR600
displays the 12-digit number on the OSD and on the
front panel display. You should make a note of this ID
number, then select Sirius channel 184 while you apply
this ID number to your account at www.sirius.com or
by calling 1.888.539.SIRIUS (7474).
Once your subscription is updated, a code is sent
over Sirius channel 184. When this code is received
the AVR600 displays ‘SUBSCRIPTION UPDATED’. is
display remains until cleared by pressing any button. e
Sirius radio module is now fully operational.
Please note that, depending on your subscription,
some channels may not be available. If a channel is not
part of your subscription package, you are invited to
subscribe to the channel - ‘CALL 888-539-SIRIUS To
Subscribe’ is displayed and audio is muted. If you have
any queries about your subscription, please contact
Sirius.
Operation
In addition to the channel and preset selection,
previously mentioned, you can also cycle through the
channel categories (Rock, Pop, Country, etc.) using the
]
and
[
keys. e rst channel in each category is
displayed. You can then scroll through other channels
in that particular category using the
D
or
E
buttons on
the CR102 remote. On the OSD a star (‘ * ”) is shown
before the category name to show you are scrolling
through channels only in the current category. Press
O
to select the currently displayed channel to listen
to it otherwise the display times out and returns to the
currently playing channel information.
Locking Channels
e Sirius module in the AVR600 has a parental lockout
feature which allows you to assign a 4-digit code to any
channels you do not wish to be generally available to
users.
Channels can be locked out individually by pressing and
holding the
MODE key. ‘Lock?’ also appears on the lower
line of the On Screen Display. Pressing
O
conrms and
applies the parental lock to the channel and the display
returns to the channel name.
If a locked channel is selected, the audio will be muted
and the user prompted on the display to enter the
unlocking code. ‘Unlock code :____’ is displayed.
e default unlock code is 0000.
If the code is entered correctly the audio for this channel
unmutes. If the code is not entered correctly, the
previously played channel is re-selected.
To remove the parental lock from one of the locked
channels (so that the unlocking code is no longer
required to listen to them), navigate to the channel,
select it and enter the unlocking code to unmute the
channel. Press and hold the
M
key until the display
shows ‘Unlock ?’. Press
O
to remove the lock from the
channel.
To change your locking code, in
TUN device mode on the
remote, press and hold the
b
key.
NOTE
e locking code is reset to 0000 if a factory reset of
the AVR600 is performed.
Sirius errors
If an invalid channel is selected, the AVR600 displays
‘INVALID CHANNEL’ and the channel reverts to the
previous valid channel.
If there is a loss of signal, the AVR600 displays
‘ACQUIRING SIGNAL’.
If the antenna is disconnected, the AVR600 displays
‘ANTENNA ERROR’.
During the channel map update, the message ‘Updating
channels - xx%’ is displayed. Note that audio is
muted until the update is complete. When complete, the
AVR600 retunes to the original channel and restores the
audio.
… 53 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam AVR600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AVR600 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam AVR600

Arcam AVR600 User Manual - German, Dutch - 200 pages

Arcam AVR600 User Manual - Dutch - 72 pages

Arcam AVR600 User Manual - French - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info