482341
12
Zoom out
Zoom in
Previous page
1/74
Next page
E-10
TAPE
CD
AV
DVD
SAT
VCR
PVR
OPTICAL
COAX
DIGITAL AUDIO INPUTSOUT
Digital audio
connectors
TAPE, CD, AV, DVD, SAT, VCR, PVR
Connect these inputs to the digital
outputs of your available source
equipment.
OPTICAL, COAX
Connect the optical or coaxial output
to your digital recording device such as
CD-R, digital VCR or Minidisc player.
When a digital source is selected,
the digital output will send an exact
copy of the incoming digital signal. For example, for a
5.1 digital source, the digital output will also be in 5.1
format.
When an analogue-only source is selected, this is
digitized by the unit and routed to the digital outputs.
ese outputs are muted if a source is selected where the
HDMI connection is used and is transmitting HD audio.
e digital audio from the HDMI link will not be routed
to these outputs.
POWER/STANDBY
MUTEZONEDISPLAYDIRECTMODEINFOOKÐ INPUT +MENU Ð VOLUME +
POWER
AVR600
V I D E O S C A L I N G
PHONES
AUX
Front panel AUX input
e front panel AUX input can be
used as an analogue or optical
digital input.
For analogue sources, use a stereo
3.5mm lead; for digital sources
use a 3.5mm optical lead. e
front input is also used for the
auto-setup microphone input.
SW
SR
R
PHONO
(MM)
R
R
SW1
SW2
SR
SBR
SL
C
SBL
SBR
L
L
L
C
SW3
SL
SBL
PRE AMP OUT
MCH INPUT
Phono
is input can be connected
directly to a record deck
which has a direct output
from a moving magnet (MM)
cartridge.
MCH input
is multichannel analogue
audio input can be connected to
a source device which outputs
surround sound on its analogue
outputs. Such devices typically
include DVD-Audio and SACD
players. is input does not
pass through any of the audio
processing in the unit, therefore
functions such as speaker size
and distance from the listening
position should be copied from the Setup menus into the
Setup menus of your multichannel source. Note however
that speaker level trims are applied to the MCH input
on the unit.erefore speaker level trim settings on
multichannel source equipment should be le unset at
zero.
Analogue pre-amplifier outputs
All pre-amplier analogue outputs are buered, have a
low output impedance, are at line level and follow the
Zone1 volume control setting. ey are able to drive
long cables or several inputs in parallel if required.
For more information on connecting speakers or
additional power ampliers, see page 23 and 53.
R
L
R L
R
LR
L
TAPE
CD
AV
DVD
SAT
VCR
PVR
VCR
PVR
TAPE
L
R
ANALOGUE AUDIO INPUTSOUT
Analogue record
outputs
VCR OUT, PVR OUT, TAPE OUT
Connect the le and right
outputs to the le and right
input sockets of your cassette
deck, PVR or VCR (usually labelled ‘
RECORD). e PVR
and VCR connectors may be used for a second and third
cassette deck. ese outputs are xed at full line level.
Analogue audio
inputs
TAPE, CD, AV, DVD, SAT, VCR,
PVR
Connect the le and right
inputs to the le and right
outputs of your source
equipment.
Front panel PHONES socket
is socket accepts headphones with an impedance
rating between 32Ω and 600Ω, tted with a 3.5mm
stereo jack plug. e headphone socket is always active,
except when AVR600/AV888 is muted.
When the headphone jack is inserted, the speaker
outputs and analogue pre-amplier outputs are
automatically muted.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam AVR500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AVR500 in the language / languages: English as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam AVR500

Arcam AVR500 User Manual - German, Dutch - 200 pages

Arcam AVR500 User Manual - Dutch - 72 pages

Arcam AVR500 User Manual - French - 200 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info