578747

Arcam AVR400 Manual

30
Zoom out
Zoom in
Previous page
1/236
Next page
E-28
SAT
SAT Device Mode
e
z
Device Mode button congures the CR102
to control the functions of a satellite receiver. You will
need to congure this Device Mode to work with your
equipment. Pressing this button also selects SAT as the
AVR400 source.
P
Toggles power between standby and on
0
…
9
Functions as original remote number key.
PHONO
E
Selects Display input on the AVR400.
TV/AV
r
Toggles between the available inputs on
your satellite receiver
S
Modies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel (
MCH) input on the
AVR400.
SHIFT +
H
selects AUX input on the
AVR400.
NET
e
Selects
IPOD input on the AVR400
SHIFT +
e
selects network (NET) internal
input on the AVR400
Navigate menus.
OK conrms a setting (equivalent to ‘Enter’
or ‘Select’ on some remotes).
M
Controls Backup function, if available.
U
Performs same function as on original
remote, if available.
D
On some Satellite and Cable set top boxes
this key functions as the Guide key to open
the EPG (Electronic Program Guide).
@
Toggles the mute function.
By default this key operates the AVR400 Mute
]
Channel down
[
Channel up
- +
Decrease (
) or increase (+) AVR400 volume
)
Fast rewind
$
Starts the playback
&
Toggles pause of playback
(
Fast forward
!
(not used)
#
Stop playback
%
Start recording
h
(not used)
u
(RED)
Duplicates function of RED key for some
Satellite and Cable set-top boxes
t
(GREEN)
Duplicates function of GREEN key for some
Satellite and Cable set-top boxes
o
(yELLOw)
Duplicates function of YELLOW key for some
Satellite and Cable set-top boxes
b
(BLUE)
Duplicates function of BLUE key for some
Satellite and Cable set-top boxes
AV
AV Device Mode
e
a
Device Mode button congures the CR102 to
control the functions of a television or other display
device. You will need to congure this Device Mode to
work with your equipment. Pressing this button also
selects AV as the AVR400 source.
P
Toggles power between standby and on.
(Some TVs require you to use a number
key to turn them on.)
0
…
9
Functions as original remote number key –
usually for channel selection.
PHONO
E
Selects Display input on the AVR400.
TV/AV
r
Toggles between the available inputs on
your display device (e.g. TV/AV)
S
Modies many keys (see individual key
descriptions, below)
AUX
H
Selects multichannel (
MCH) input on the
AVR400.
SHIFT +
H
selects AUX input on the
AVR400.
Navigate setup and programme selection
menus.
OK conrms a selection (equivalent to
‘Enter’ or ‘Select’ on some remotes).
M
EXIT function on some models.
U
Functions as original remote key, if
available.
D
Display INFO or OSD (On Screen Display)
function, if available.
@
Toggles the mute function.
By default this key operates the AVR400
Mute
]
Channel down
[
Channel up
- +
Decrease (
) and increase (+) AVR400
volume.
)
Toggles TEXT page on/o
$
TEXT page o
&
Turns Programme-In-Programme (PIP)
on, if available
(
Activates PIP move, if available
!
Activates PIP swap, if available
#
Activates PIP freeze, if available
%
Activates PIP channel up, if available
h
Activates PIP channel down, if available
u
(RED)
Duplicates function of RED key for Text TV
t
(GREEN)
Duplicates function of GREEN key for Text
TV
o
(yELLOw)
Duplicates function of YELLOW key for Text
TV
b
(BLUE)
Duplicates function of BLUE key for Text
TV
… 30 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam AVR400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AVR400 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 16,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info