Manual Arcam AVR380 (page 14 of 206) (English, German, Dutch, French, Italian, Spanish)

578722

Zoom out

Zoom in

1/206

E-23E-22

English

AMP

AMP Device Mode

e

Device Mode button congures the CR450

to control the AV950/AVR750/450/380. Pressing this

button does not aect the currently selected input on the

AV950/AVR750/450/380.

IMPORTANT: e CR450 must also be in AMP Device

Mode to control the following sources: BD, AV, VCR,

GAME, STB, SAT, PVR or CD.

e functionality of the CR450 is context sensitive for

the internal sources and is described in the following

table.

Single press – Toggles AV950/

AVR750/450/380 power between standby

and on in the current zone (zone in which

the command is received).

Press and hold – Forces all zones into

standby, regardless of which zone the

command was received in.

Displays the room EQ settings menu.

…

e number keys can be used for source

selection (without changing the CR450

Device Mode). Alternatively, the Device

Mode buttons can be used with the

key.

SAT (satellite) input

STB input

AV input

TUNER input

BD input

GAME input

VCR input

CD input

AUX (front panel) input.

Cycles through the front panel display’s

brightness options

RPT

Cycles through the available surround and

downmix modes.

FAV+

)

Rewind.

Adds the currently displayed radio station

to favourites list when using the internet

radio function.

TRIM

Brings up the speaker trim menu.

Use the

, <

and

navigation

buttons. Press TRIM again to exit the speaker

trim menu.

As this is a temporary adjustment, these

trim levels are reset to zero when the

unit is turned o or put into standby,

but are retained if the selected input is

changed. ese temporary trim levels are

independent of the speaker levels found in

the setup menu.

DIRECT

Stereo direct on/o. Provides a direct

analogue path from the analogue inputs to

the le and right front outputs. Switches o

any surround processing modes and shuts

down the DSP circuits for the best stereo

sound quality.

SYNC

Sync. Delays may be introduced into the

video signal by video processing which

causes a mismatch between the audio and

video timing. You will notice this by speech

sound being out of synchronization with the

lip movements in the video. To compensate

for this, you can adjust the lip sync delay.

Press the SYNC button and use the

and

navigation buttons. Press again to exit the

lip sync trim menu.

EFFECT

;

Toggles Dolby Volume on/o.

SUB

Brings up a temporary subwoofer trim

control. Use the

and

navigation

buttons. Press SUB again to exit the sub trim

control.

As this is a temporary adjustment, the

sub trim level is reset to the value set in

the Speaker Levels menu when the unit is

turned o or put into standby.

DISC MENU

Info cycles through the information

displayed on the lower le portion of the

front panel display when on TUN, NET and

USB inputs.

POP UP

Displays the unit’s setup menu on the On

Screen Display.

Navigate the files and menus on the screen.

OK selects the highlighted file or enters the

highlighted menu on the screen

– equivalent

to ‘Enter’ or ‘Select’ on some remote

controls.

Le

Right

Down

Power on from standby

Standby from Power on

select Zone 2

changes the picture resolution.

Returns navigation to the top level of the

network client menus (‘Home’).

AUDIO

Calls up a pop-up to adjust the bass setting

for a particular input.

Toggles the mute function of the AVR.

Increase amplier volume.

SUBT

Calls up a pop-up to adjust the treble setting

for a particular input.

Resets remote to AMP mode.

Decrease amplier volume.

Tuner / Red button.

Aux / Green button.

Network (NET) internal input / Yellow

button.

USB / Blue button.

BD/DVD input.

AV input.

VCR input.

Game console input.

Set top box input.

Satellite input.

PVR input.

CD input.

USB commands

e USB interface is selected by pressing

in AMP

Device Mode on the CR450. When connected to an

iPod or other device storing music les connected by

USB, the keys below are used to navigating music tracks.

Navigates the les on screen.

selects/plays the highlighted le.

TRIM

DIRECT

Selects the previous/next track in the

current playlist.

EFFECT

;

Toggles pause and playback of the current

track.

Stops playback..

Network commands

When using the network client, the keys below are used

to navigate music les in AMP Device Mode.

Navigates the les on screen.

selects/plays the highlighted le.

TRIM

DIRECT

Selects the previous/next track in the

current playlist.

EFFECT

;

Toggles pause and playback of the current

track.

Stops playback..

FAV+

)

Adds the currently displayed le or radio

station to the favourites list when using the

network client.

FAV–

(

Removes the currently displayed le or

radio station to the favourites list when

using the network client.

Returns navigation to the top level of the

network client menus (‘Home’)

BD/DVD Device Mode

e

Device Mode button congures the CR450 to

control the functions of Arcam Blu-ray Disc and DVD

players, although this can be changed. Pressing this

button also selects BD as the source.

Toggles power between standby and on.

Open/close disc tray.

…

Searches for and plays the track

corresponding to the key pressed when

playing a CD.

Cycles through the front panel display’s

brightness options.

RPT

Cycles through the repeat options (track,

disc, etc.).

FAV+

)

Fast rewind.

FAV–

(

Fast forward.

TRIM

Press and release to skip back to the

beginning of the current/previous track.

DIRECT

Press and release to skip forwards to the

beginning of the next track.

Stereo direct on/o. Provides a direct

analogue path from the analogue inputs to

the le and right front outputs. Switches o

any surround processing modes and shuts

down the DSP circuits for the best stereo

sound quality.

SYNC

Stop playback of a BD or DVD.

EFFECT

;

Toggles pause and playback of the current

track.

SUB

Start recording (on products that have this

feature).

DISC MENU

Disc menu.

POP UP

Activates BD/DVD player menu, if

available.

Navigate setup and BD/DVD programme

selection menus.

selects the highlighted file or enters the

highlighted menu on the screen

– equivalent

to ‘Enter’ or ‘Select’ on some remote

controls.

Le

Right

Down

Power on from Standby

Standby from Power on

changes the picture resolution (for

BD, only on the Home screen).

Returns navigation to the top level of the

menu (‘Home’).

AUDIO

Changes audio decode format (Dolby

Digital, DTS, etc.).

SUBT

Cycles through subtitle options, if available.

Resets remote to AMP mode.

RED button for BD

GREEN button for BD

YELLOW button for BD

BLUE button for BD.

Toggles power between standby and on.

(Some TVs require you to use a number key

to turn them on).

…

Functions as original remote number key –

usually for channel selection.

Display INFO or OSD (On Screen Display)

function, if available.

RPT

AV; this function is TV specic.

TRIM

Channel down.

DIRECT

Channel up.

DISC MENU

Displays picture information; this function

is TV specic.

POP UP

Guide.

Navigate setup and programme selection

menus.

conrms a selection (equivalent to

‘Enter’ or ‘Select’ on some remotes).

Returns navigation to the top level of the

menu (‘Home’).

SUBT

Cycles through subtitle options, if available.

Resets remote to AMP mode.

RED key for Text TV

GREEN key for Text TV

YELLOW key for Text TV

BLUE key for Text TV.

AV Device Mode

e

Device Mode button congures the CR450 to

control the functions of a television or other display

device. You will need to congure this Device Mode to

work with your equipment. Pressing this button also

selects AV as the source.

VCR

VCR Device Mode

e

Device Mode button selects VCR as the source.

e VCR page allows code learning from a dedicated

VCR remote – see “customising the CR450” on page

E-40.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AVR380 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam AVR380 Manual

Product: