Manual Arcam AV950 (page 12 of 206) (English, German, Dutch, French, Italian, Spanish)

578719

Zoom out

Zoom in

1/206

E-19E-18

English

channel and surround information can be heard via the

headphones.

Using Zone 2

Zone2 provides the option for the occupants of the

master bedroom, conservatory, kitchen, etc. to view or

listen to a dierent source at a dierent volume level

from the main zone (Zone1).

Source selection and volume control for Zone 2 is

achieved:

by using an IR receiver in Zone 2 (see “Zone2

control connections” on page E-38), or

by switching over to Zone 2 control by pressing the

front panel zone button, or

by pressing AMP + OK on the remote control.

e front panel VFD display indicates that control has

been switched to Zone 2.

STANDBY Z2 50

To turn on Zone 2, press the Zone button (or AMP +

OK) then press the standby power button on the remote

control. Press a source select button to select a dierent

source to Zone 1.

FOLLOW Z1 Z2 50

Note that Zone 2 control from within Zone 1 will pass

automatically back to Zone 1 control aer a few seconds

of inactivity.

Zone 2 can also be controlled using a third-party

programmable remote control or a home automation

system. Please contact your dealer or installer for

further details.

Extended front panel menu

Pressing the MENU key and holding it for longer than

four seconds will bring up the Extended Menu, allowing

you to perform the following:

Restore to factory defaults

is option allows you to restore all settings on your

AV950/AVR750/450/380 to the defaults that it le the

factory with.

Change remote code

e default RC5 system code the AV950/

AVR750/450/380 responds to is 16. If required, for

example due to another device in your system also using

this RC5 system code, it can be changed to 19.

Restore secure backup

is option allows you to restore all settings to their

state as saved using the ‘Store secure backup’ feature.

is option is useful if settings are accidentally changed.

It also allows the unit to be returned to the saved state

following a rmware update.

Store secure backup

is option allows you to save all the AV950/

AVR750/450/380 settings to a secure area of memory.

e settings can be retrieved using the Restore option

above.

– Enter PIN

Enter the secure backup PIN using the

and

keys on the remote control (do not use the

numeric keypad). The default PIN is 1234.

– Change PIN

Allows the PIN to be changed to a number other

than the default. Enter the current secure backup

PIN using the

and

keys on the

remote control (do not use the numeric keypad).

The default PIN is 1234. After the current PIN has

been entered correctly, enter a new PIN as prompted

and again to confirm.

– EXIT

Cancel and return to the extended menu.

Updating firmware via USB

e rmware in your AV950/AVR750/450/380 can be

updatedfromaUSBashdrivecontainingarmware

update le.

You can download the latest rmware le, together

with upgrading instructions, from the Arcam website

(www.arcam.co.uk/advice-and-support.htm).

AVR750

Remote control receiver. is is positioned behind

the display window, above the MENU button on the

front panel. Ensure the receiver is in a clear line of

sight from the remote control for operation. If this is

not possible, use a separate sensor connected to the

Z1 IR input on the rear panel.

front panel

operation

Power

Switches the main power to the

AV950/AVR750/450/380 on

and o.

Once the unit is switched o,

it should be le for at least ten

seconds before switching on

again.

Volume

Adjusts the analogue output

volume in the selected zone

(line out, speakers and

headphones).

Aux

Multi purpose auxiliary

line level input,

calibration microphone

input and 3.5mm optical

digital (SPDIF) input.

Phones

is socket accepts headphones

with an impedance rating between

32Ω and 600Ω, tted with a 3.5mm

stereo jack plug.

Input

ese buttons select the source

connected to the corresponding

input (or internal input)

Unused sources can be prevented

from being selected in the setup

menu.

Selects the Setup menus on the

on-screen display (OSD).

Used to enter selections made in the

Setup menu. Press and hold to reset

video outputs to the lowest resolution

(HDMI: 480p).

Info

Selects the information displayed on the

lower le portion of the front panel.

Mode

Selects between Stereo and the available

surround modes for the current source.

Direct

Stereo Direct on/o. Provides a direct analogue path from

the analogue inputs to the le and right front outputs.

Switches o any surround processing modes and shuts

down the DSP circuits for best stereo sound quality.

Display

is switches the display brightness

between o/dim/bright.

Zone

Selects between Zone1 and

Zone2 control.

Mute

Mutes all analogue audio outputs in the

currently selected zone.

Power / Standby LED

is indicates the status of the receiver and is

green when the AV950/AVR750/450/380 is

powered on. Red indicates the unit is in Standby

mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam AV950 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 28,12 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam AV950 Manual

Product: