Manual Arcam airDAC (page 7 of 32) (English, German, Dutch, French, Italian, Spanish)

578733

Zoom out

Zoom in

1/32

12 13

Operation

Wired connection to a network

The recommended method for connecting the airDAC into an existing home network is over the wired

Ethernet connection and the device is congured to do this by default. Simply plug one end of the

Ethernet cable into the airDAC, and the other end into a spare Ethernet port on your network and power

on. Once the device is booted and has been assigned an IP address by the network, the network state

LED will show green indicating the airDAC is ready for use.

Access point mode

“AP Mode” is a feature which allows the airDAC to act as a wireless access point, eectively creating its

own wireless network enabling the user to enjoy the convenience of a wireless connection without the

need of an existing network or additional hardware. In its default conguration and assuming no wired

network connection exists to the airDAC, this mode is enabled automatically at power up. To use, ensure

the wired Ethernet cable is disconnected and power on the airDAC. Once the network LED has turned

green indicating that the unit is ready, connect your wireless device to the “ARCAMDirect” access point.

AP mode SSID, channel and security settings can be modied using the “AP Mode” section of the web

interface, see “Accessing the Web Interface” below for details.

Wireless connection to a network

Connecting the airDAC to your existing wireless network is done by selecting your SSID from the list of

detected networks and entering the relevant security details through the “Network Cong” section of the

web interface. See “Accessing the Web Interface” below for details.

Note:

Switching between wired and wireless connections requires a power cycle as the selection of network

interface occurs when the airDAC is rst switched on. If using a wired connection, the cable should be

present during the powerup stage and similarly, when using a wireless network a wired connection must

not be present.

Accessing the Web Interface

Once the airDAC and your wireless device are connected using one of the network connection methods

above, the web interface may be accessed by entering the IP address of the device into the address bar

of your internet browser. The default IP address when in AP Mode is 192.168.1.12, when connected by

wired or wireless connection the IP will be as assigned by the DHCP server on your network.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Arcam airDAC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,95 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Arcam airDAC Manual

Product: