578723
9
Zoom out
Zoom in
Previous page
1/107
Next page
E-13E-12
English
SP1 and SP2
ese buttons allow you to switch the speakers on and
o.
e LED above each button glows green to indicate
which speakers are currently selected. If you are using
the bi-wiring conguration described on page15, both
SP1 and SP2 must be switched on.
Note that when both lights are out, the amplier will
appear not to work, as all speakers are switched o.
SP1 SP2
POWER
POWER / STANDBY
Switching on
e POWER button switches the unit on and o.
e power light (next to the ‘POWER / STANDBY’
text) indicates the state of the amplier: it changes from
red to orange then green if mains power is connected
and the unit is switched on.
P49/P349
operation
CR902 remote
control
e CR902 is pre-programmed for use with the
A49.
Make sure the two AAA batteries supplied are
installed before attempting to use the remote
control.
A. With the CR902 remote face-down, press down
on the non-slip indentations of the battery
compartment cover and slide the cover o.
B. Insert the two ‘AAA’ batteries supplied. Take
care to insert the batteries in the right direction
by following the ‘+’ and ‘’ marks in the battery
compartment.
C. Slide the battery compartment cover back and
lock it in place with a click.
e CR902 requires a clear line of sight to the front
panel display of A49 to ensure reliable operation.
AUDIO
SACD
MENU
FM MONO P/TUNE
STORE
INFO
BD
CR902
RTN
Alternative code selection
In the rare sitatuation that the CR902 remote control
happens to operate another device in the room, the
IR code can be changed to an alternative RC5 system
number.
To change the remote control to the alternate code:
Press and hold the AMP key and press
1
and then
9
.
To restore to the original code:
Press and hold the AMP key and press
1
and then
6
.
Note: the selection of the alternate codes is reset when
the batteries are changed.
In addition to changing the remote handset, the A49/
C49 unit must also be recongured to respond to the
alternate codes. Either use the MENU button on the remote
to access the setup menu, or press the front panel SAT,
CD and MUTE buttons simultaneously and use the control
knob to change the setting. e front panel display shows
(e.g.) IR SYS 16.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam A49 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam A49 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info