578745
16
Zoom out
Zoom in
Previous page
1/76
Next page
E-14
P38
connections



















Connecting to loudspeakers
e P38 amplier may be connected by simple wiring,
bi-wiring or bi-amping – see page 9 for details. In
addition, see the following section on the Mono Link
(and the diagram below) for another way of bi-amping
loudspeakers using a pair of P38s.
Other connections
e P38 amplier provides the following connections:
AUDIO IN
Connect the output sockets of your pre-amp. (or the
PRE OUT sockets of an integrated amplier, such as the
A38) to one of these inputs.
Mono Link
e P38 can be adapted to provide two mono
loudspeaker outputs from a single input. Using a pair of
P38s (i.e. one power amplier per loudspeaker) enables
you to bi-amplify a pair of compatible loudspeakers,
reducing the amount of cross-talk between channels
compared with using the P38 in a more conventional
stereo conguration.
1. Connect the RIGHT channel from your pre-amp
(or PRE OUT R from an A38) to the socket labelled
AUDIO IN R on your rst P38.
2. Pull out the link supplied on the back panel
(labelled ‘link’), and use it to connect the le and
right AUDIO OUT sockets together.
3. Repeat steps 1 and 2 on your second P38, but
this time connect the LEFT channel from your
pre-amp (or PRE OUT L from an A38) to the socket
labelled AUDIO IN L.
4. Follow the diagram (le) for bi-wiring each
speaker, using the SP2 connections of the P38
for the high-frequency speaker and the SP1
connections for the low-frequencies in each case.
Daisy chaining more ampliers
e P38 can be connected to further power ampliers
to drive more speakers (e.g., those in other rooms,
tri-amplied speakers, etc). is technique is called
‘Daisy chaining’.
Connect the AUDIO OUT sockets on the P38 to the
pre-amp input of the next amplier in series, le to le,
right to right.
Note that daisy-chaining cannot be used if the Mono
Link (previously described) is in use.





Using a pair of P38s with the Mono Link to bi‑amplify a pair of speakers
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam A38 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam A38 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info