578718

Arcam A19 Manual

13
Zoom out
Zoom in
Previous page
1/86
Next page
E-11
English
Recording an audio source
e A19 allows you to record and monitor the sound
from any connected source.
e back panel REC OUT socket can be connected to the
input sockets of your recording device (these are usually
labelled RECORD or IN).
To record from a particular source, press the appropriate
source button (for example, TUNER).
Adjusting the balance
e balance setting allows you to increase the volume of
one channel (le or right) relative to the other. Altering
the balance may help to restore the stereo image for an
o-centre listening position.
Balance can be adjusted from the front panel or from the
remote control. Click the BALANCE button (or BAL on the
CR108) to view the current setting, then use the control
knob (or the +/– buttons on the remote) to change the
setting – from L9 to R9, via the neutral value 0.
Troubleshooting
If you are having trouble with your amplier, check the
following items.
No sound
Check the following:
< e A19 amplier is powered up and switched on.
< e amplier is not muted (i.e. MT (mute) is not
shown on the display panel; the power light is
showing green, not orange or red).
< e selected source is generating audio (e.g., if CD
is selected, then the CD is playing).
< e speaker outputs are connected on the A19 (or
on the power amplier, in the case of a bi-amping
arrangement).
Sound cuts-out unexpectedly
If the temperature of the internal heatsink rises above
a safe level, then a thermal cut-out inside the amplier
operates to protect the unit and the protection system
temporarily removes power to the speakers. e system
will reset itself as the heatsink cools down.
< With two pairs of low-impedance speakers
connected (6Ω or less), overloads are more likely.
Overloading the amplier may cause it to shut
down because of overheating.
< Note that, due to the high output voltage from some
CD players, it is possible to drive your amplier
at full power even though the volume is not set at
maximum.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam A19 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam A19 in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info