578743
7
Zoom out
Zoom in
Previous page
1/14
Next page
E-7
English
Pre-amplifier connection
PRE OUT
To use your A18 as a dedicated pre-amplier, or as part
of a bi-amped system, connect the
PRE OUT sockets to
the input sockets of your power amplier.
Audio inputs
Although the inputs are labelled for specic devices, all
have the same characteristics and each may be used with
any line-level product. e exception is the PHONO MM
input (see page 12 for the specication).
AV IN
Intended for the analogue outputs from general audio-
visual equipment, such as a VCR, digital TV/satellite
receiver, or Nicam tuner.
PVR IN
Intended for the analogue outputs from a Personal
Video Recorder, or similar device.
DVD
Intended for the analogue outputs from a DVD-player.
SAT
For connection to a satellite TV receiver or cable box.
TUNER
Intended for the analogue outputs from an FM, AM or
DAB radio tuner.
CD
Intended for the analogue outputs from a CD player.
AUX
is is a 3.5mm analogue input on the front panel
intended for use with devices such as MP3 players. To
connect an MP3 player (or other portable audio device)
you will need a 3.5mm to 3.5mm cable connected
between the
AUX input and the headphone socket of the
device.
Recording loops
e A18 is equipped with two recording loops: AV and
PVR. ese are for use with recording devices – such as
a CD recorder, DAT recorder, cassette recorder, VCR,
PVR, etc. e AV outputs may have any of the input
connectors assigned to them for recording purposes.
AV OUT
Connect these output sockets to the input sockets of
your recording device (usually labelled RECORD or IN).
To record from a particular source, press the appropriate
source button (for example,
TUNER), then press AV. Any
source selected immediately before AV is routed to the
AV OUT connectors for recording purposes and is shown
on the front panel (e.g. RC  TUNER).
PVR OUT
e
PVR OUT also has the source selected immediately
before AV routed to it, unless that source is PVR IN, in
which case PVR OUT is muted. As with AV OUT, changing
to another source will change the signal that is sent to
PVR OUT.
Phono input
e phono inputs provide a pre-amplication stage to
treat the low-voltage output from a moving magnet
cartridge (input specications are given on page 12). If
you have already an external phono amplier that you
wish to use, connect its output to one of the line-level
inputs.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arcam A18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arcam A18 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Arcam A18

Arcam A18 User Manual - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info