813453
10
Zoom out
Zoom in
Previous page
1/28
Next page
Villager Stove User Guide
Figure 2: Double door stove air inlet controls.
4.2.2 Airwash system / Secondary air
The airwash/secondary air inlet has an internal sliding plate with slots, housed
in a cover plate, and is located either above or at the top of the re door.
Sliding the control knob(s) inwards as far as they will go, achieves the fully open
position, see position 2 in gure 2. Sliding them outwards will shut o the air
inlet slots as shown in position 1.
5 Lighting your stove
5.1 Burning wood in a multi fuel stove
When wood is burnt it is in fact the wood gas that burns and this requires
a good supply of air coming from above the fuel. For this reason we will use
all the air inlets while igniting the stove, but will then reduce this to air coming
from the airwash system and over draught. As much as 40% of the heat from
burning wood is obtained from secondary combustion and this can be severely
hampered by air entering the re box from below the fuel via the primary air inlet
control.
1. Multi fuel stoves need the grate system set to its wood burning position
using the supplied operating tool as follows:
BK550 Rev08 6
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Arada Villager at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Arada Villager in the language / languages: English as an attachment in your email.

The manual is 2.16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info