17
Maintenance
Make sure that the appliance is not plugged into
the power mains.
Remove the suction hose (4) (B1) from the tank.
Loosen the clamps (B2) and separate the upper
section from the tank (B3)
.
Remove all the dirt and residue from the tank and
the hose.
Clean the foam plastic filter (9) (B1) by washing it
with a mild detergent.
Check the hoses and connections and check the
power cord for any damage.
When the foam plastic filter (9) (B1) is removed,
check the float (12) (B1). To do this, take the
upper section by the handle and tip it carefully so
that the filter basket is facing upwards. The float
should move freely up and down
.
Troubleshooting
The appliance
doesn’t work.
No power
Functional fault
in the power
cord, switch, or
motor
Tank is full of
liquid
Check the power
supply.
Have the
damaged part
checked by qua
-
lified personnel
or replace it.
Empty the tank
Dust is escaping
from the motor
cover.
The dust bag
is missing or
damaged
Put in a dust bag
or replace it.
Low suction
power and high
motor speed /
vibrations
Dust bag is full
Suction nozzle,
hose, or tank
inlet is plugged.
Replace the dust
bag
Check the suc
-
tion nozzle, hose,
and tank inlet for
obstructions.
Technical Data
Supply voltage: 230V~/50Hz
Max. power: 1600W
Tank volume: 50 l stainless steel tank
Hose system: 38 mm Ø
Filter – dry: Paper bag/plaited filter
Filter – wet: plastic foam
Repairs
Only use accessories and spare parts recommen-
ded by the manufacturer. If the appliance should
fail in spite of our quality control and your main
-
tenance, then have it repaired by an authorised
electrician only.
Disposal
The packaging of your new wet/dry
vacuum cleaner has a green dot on it.
Please dispose of it as recycled paper or
by using the „Dual System“. The vacuum
cleaner bags are made of environmentally safe,
unbleached paper materials. They can be dis
-
posed of with the regular household waste.
Old appliances should be disposed of professio
-
nally. Ask your city or municipal administration.
The plastic elements of the wet/dry vacuum
cleaner are identified with material labels in
accordance with DIN 7728. That way, valuable raw
materials can be recycled.
Spare filter:
Plastic foam filter: Art. No.: 45120275
Plaited filter: Art. No.: 45120276
Filter – dry: Art. No.: 45120277
Dust bag, 50 litre Art. No.: 45120327
Fine
dust bag, 50 litre (3x): Art. No.: 45120328
Pleated filter for fine dust: Art. No. 45120308
Subject to technical change without prior notice.