626705

Aquapur ADR 900 A1 - IAN 42784 Manual

45
Zoom out
Zoom in
Previous page
1/48
Next page

43EN




Unscrew the safety cap (C) and overturn the boiler tank to drain it completely.
Fill boiler with water (Fig. 1) by using the measuring cup (I) and the funnel (R).
The boiler must be filled completely using the measuring cup (I) twice filled with water up to
the black-coloured reference notch. Screw the safety cap (C) on again.

Insert the plug attached to the power cord into the outlet. The warning light (G) will go on.
Steam will be ready after about 3 to 4 minutes. Press button (D) to release steam.


a) slide the accessory as far as the stop so that the nozzle reference slot and the yellow slot
on the appliance meet up (Figure 2);
b) turn in a clockwise direction until the mark on the nozzle is perfectly aligned with the two
lines on the appliance’s body. Now the attachment is blocked in the central position.
The appliance is provided with an articulated joint which allows the jet of steam to be
directed as desired: insert the straight nozzle until it covers the black round gasket. Bring the
nozzle reference line to meet the yellow slot on the appliance (Figure 2).
Turn in a clockwise direction until the mark on the nozzle is perfectly aligned with the two
lines on the appliance’s body. Now you can direct the jet of steam as desired (Figure 3).

Both these attachments can be applied to the straight nozzle (Figure 4 and 5) and the articu-
lated nozzle (Figure 6 and 7). Apply them to the hexagonal end and then choose the desired
angle.

The flexible pipe (O) must be attached to the articulated nozzle (B). Then apply the round
brush (L), the bent nozzle (M) the straight nozzle (N) and then the brush for fabrics (P) to the
hexagonal end on the pipe.
The brush for fabrics is provided with a cloth that can be used for the cleaning of delicate sur-
faces such as sofas and armchairs, and with a glass wiper to be fitted as shown in figure 8.

When the water in the boiler tank has run out and you press the button (D) no steam will come out.
To refill, carry out the following operations:
• unplug the appliance;
• wait for about 10 seconds;
• carefully unscrew the safety cap (C). Before unscrewing it completely wait for the hissing
noise created by residual steam to stop;
• unscrew the cap completely and slowly pour a measuring cup of water into the boiler using
… 45 …


Need help? Post your question in this forum.

Forumrules
1

Forum

aquapur-adr-900-a1---ian-42784

Reset search

  • Adr 900 A1 part no. "O" is damaged. Where can I buy this ? Submitted on 16-5-2018 at 09:36

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aquapur ADR 900 A1 - IAN 42784 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aquapur ADR 900 A1 - IAN 42784 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1,48 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info