783934
8
Zoom out
Zoom in
Previous page
1/32
Next page
8
9
lever to water flow, and turn the spout/hose left and
right. Make sure the connection is tight, and fix any leaks
before use.
g. Connect the water heater plug to the power supply.
2. With power connection below the sink (ill. 4). Important!
Please ensure that the opening in the worktop or sink is
large enough for the plug. If you are unable to fit the plug
into the hole, please contact a specialist.
a. Place the spacer ring (8) with the crown facing upwards
into the lower part of the main unit (2). Make sure that
the cable is placed in the recess provided.
b. Place the rubber sealing ring (3) underneath the spacer
ring (8). Thread the power cable and the thread of
the continuous flow heater into the hole of the rubber
sealing ring (3).
c. Insert the thread of the continuous flow heater and
the power cable through the opening provided on the
sink or worktop (4). If you are unable to fit the plug into
the hole, please contact a specialist. When you first
create the opening for attaching the fitting, make sure
that it is no larger or smaller than 4 cm. Depending on
the thickness of the countertop, the fitting can still be
attached with a diameter of 4 cm and the Aquadon plug
can be inserted through the opening.
d. From below, place the cable guide ring (5) (with the
cable recess facing upwards) onto the thread of the
main unit (2). To fix, screw in the fastening nut (6).
e. Screw the flexible hose to the thread of the continuous
flow heater and to the water outlet on the wall.
f. Open the water supply, set the continuous flow heater
lever to water flow, and turn the spout/hose left and
right. Make sure the connection is tight, and fix any leaks
before use.
g. Connect the water heater plug to the power supply.
NOTE: First connect the water. If all seals are tight, the
device can be connected to the power.
Setting the water temperature (ill. 5):
Depending on the position of the lever, you can choose
between ‚cold‘, ‚warm‘ and ‚off‘ ranges. If the lever is turned
down, the flow for cold water will increase; turn the lever
upwards and the flow for hot water increases. With an
increase in the flow rate in the warm water range, the water
temperature drops. If the device is operated in the hot
water range, you will see the current water temperature on
the display.
NOTE: To conserve power, there is a regulator in the unit
that ensures that electricity is only consumed during the
use of hot water. Connecting and disconnecting the device
is therefore not necessary.
CLEANING AND MAINTENANCE
Cleaning the water outlet (ill.6):
When water flow becomes less consistent or weaker, the
water outlet needs cleaning. Proceed as follows: Unscrew
the water outlet in an anti-clockwise direction and descale
or replace as necessary. Then reattach the water outlet.
Cleaning of water filter (ill. 7):
If cleaning the water outlet does not produce the desired
effect, remove the water filter at the water inlet, situated
at the bottom of the thread from the main unit (2), clean it,
and then reinstall it.
SPECIFICATIONS:
Power (kw): 3
Water pressure (Mpa): 0,04 – 0,6
Waterproofing Grade: IPX4
Rated voltage: 220 – 240V ~ 50/60 Hz
Daily electricity consumption Qelec: 0.374 kWh
Load profile: 3XS
Water heating energy efficiency nwh: 37.6%
This product complies with the European directives.
Do not dispose this product at the end of its service
life through normal domestic waste. It has to be
disposed through a collection agency that recycles
electric and electronic devices. This is pointed out by the
symbol on the product, in the instruction manual, and
on the packaging. Please inquire about local collection
agencies that may be operated by your distributor or your
municipal administration. By recycling, making use of
the materials, or other forms of recycling old units you
are making an important contribution to protecting our
environment.
Food-safe
Protection class 1
Made in China
FR
CONSIGNES DE SÉCURITÉ
Lisez la notice avant utilisation et conservez-
la en lieu sûr pour toute référence future.
Le robinet doit être ouvert et l‘appareil
doit être raccordé à une source de courant
électrique.
Cet appareil doit être installé en position
verticale. Toute autre position est interdite.
Afin d‘éviter une surchage du circuit
M20411_Aquadon_Manual_20210512_MM.indd 8M20411_Aquadon_Manual_20210512_MM.indd 8 12.05.21 17:3212.05.21 17:32
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Aquadon Smart Heater M20411 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Aquadon Smart Heater M20411 in the language / languages: English, German, Dutch, French, Italian, Polish, Turkish, Spanish as an attachment in your email.

The manual is 1.51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info