172839
9
Zoom out
Zoom in
Previous page
1/36
Next page
Chapter 1 Xserve at a Glance 9
On/standby button and light
Press to turn on the Xserve. Press for approximately ve seconds to force the Xserve to shut down
if all other shutdown methods fail. The light is bright white when the Xserve is on, and pulses when
the Xserve is in sleep mode.
Enclosure lock and status light
The lock secures the Xserve cover and drive modules. It can be locked and unlocked with the
enclosure key supplied with the Xserve.
An option in the Security pane of System Preferences lets you disable a connected keyboard and
mouse when the enclosure is locked. When this option is enabled and the enclosure is locked
(the light is on), the Xserve doesn’t recognize a keyboard, mouse, or hot-pluggable storage device.
Unlock the lock to use those devices.
System identier button and light
The yellow system identier light ashes if a problem is detected. You can also turn it on or o
manually by pressing the button, or turn it on remotely using Server Monitor. This indicator is useful
for locating a particular unit in a rack with more than one Xserve. A second system identier button
and light are on the back of the Xserve.
You also use the system identier button to select an alternative method for starting the Xserve
using the front panel startup options; see “Choosing a Startup Method from the Front Panel” on
page 14.
Ethernet link lights
Two lights indicate whether the Xserve is connected to an Ethernet network. Each light represents
one of the two built-in Ethernet ports: the bottom light for port 1 and the top light for port 2.
Optical drive
You can use the slot-loading optical drive to install software on the Xserve.
Drive modules and lights
You can install up to three Serial ATA (SATA) or Serial Attached SCSI (SAS) drive modules in the
Xserve. These modules can be removed and installed while the Xserve is running. Each drive module
has lights showing operating status and disk activity.
System activity lights
These lights indicate the activity level of the processors.
You also use these lights to select an alternative method for starting the Xserve using the front panel
startup options; see “Choosing a Startup Method from the Front Panel” on page 14.
USB 2.0 port
Provides a USB 2.0 connection on the front of the Xserve. There are also two USB 2.0 ports on
the back panel. The enclosure lock must be unlocked for the Xserve to recognize some devices
connected to these ports.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apple xserve at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apple xserve in the language / languages: English as an attachment in your email.

The manual is 1,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Apple xserve

Apple xserve User Manual - German - 40 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info