288268
55
Zoom out
Zoom in
Previous page
1/73
Next page
m The cameras memory may have no room for another image. Transfer the
images from the camera to your Macintosh, then erase the images. (See
“Erasing Images From the Camera” in Chapter 3.)
m The camera may be connected to your Macintosh. You can use the camera
controls on the Macintosh to capture images (see “Capturing Images From
the Macintosh” in Chapter 3), or disconnect the serial cable from the
camera.
The Macintosh doesn’t recognize the camera
Different devices and programs may compete with the camera for the use of
a serial port on your Macintosh. If theres a problem, a message tells you that
the camera is not responding. Make sure the serial cable is connected
properly, the camera is turned on, and the batteries have enough power.
m If you upgraded your system software after you installed your QuickTake
camera software, you may need to reinstall the camera software. See “What
if You Upgrade Your Macintosh System Software?” in Chapter 1 for
instructions on reinstalling the camera software.
m If you are sharing a serial port that you use for another device and
AppleTalk is turned on, turn AppleTalk off.
m If you tried to install the QuickTake camera software by dragging it to
your hard disk, it will not work correctly. Reinstall the software using the
Installer provided on QuickTake Disk 1.
m If you have a Macintosh IIfx, or a Macintosh Quadra 900 or 950, the serial
switch must be set to “Compatible” rather than “Faster.” (To set the serial
switch, use the Serial Switch control panel.)
Not enough memory
To make more memory available, try quitting open programs that youre
not using.
Can’t see anything through the viewfinder
m Make sure the lens cover is open.
m Move the camera around slightly as you look through it. You need to look
straight through the viewfinder.
45
Maintenance and Troubleshooting
55


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apple quick take 150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apple quick take 150 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info