Chapter 13 Tips and Troubleshooting 57
If iPod nano isn’t playing music
m Make sure the volume is adjusted properly. A maximum volume limit might be set. You can
change or remove it in Settings. See Set the maximum volume limit on page 25.
m Make sure you’re using iTunes 12.2 or later (available at www.itunes.com/downloads). Songs
purchased from the iTunes Store using earlier versions of iTunes won’t play on iPod nano until
you upgrade iTunes.
If you connect iPod nano to your computer and nothing happens
m Make sure you installed the latest iTunes software from www.itunes.com/downloads.
m Try connecting to a dierent USB port on your computer.
Note: Your computer needs a USB 2.0 port or a USB 3.0 port to connect iPod nano. If you have a
Windows PC that doesn’t have a USB 2.0 port, in some cases you can purchase and install a USB
2.0 card.
m If iPod nano is connected to a USB hub, try connecting iPod nano directly to a high-power USB
2.0 port or USB 3.0 port on your computer.
m iPod nano might need to be reset (see page 56).
m If you’re connecting iPod nano to a portable computer using the Lightning Cable, connect the
computer to a power outlet before connecting iPod nano.
m Make sure you have the required computer and software. See If you want to check the system
requirements on page 59.
m Check the cable connections. Disconnect the cable at both ends and make sure no foreign
objects are in the USB ports. Then reconnect the cable.
m Try restarting your computer.
m If none of the previous suggestions solves your problems, you might need to restore iPod nano
software. See Update and restore iPod software on page 59.
If music stops when the iPod nano screen turns o
m Make sure the headphone jack is free of debris.
If iPod nano displays a “Connect to Power” message
m This message may appear if iPod nano is exceptionally low on power and the battery needs
to be charged before iPod nano can communicate with your computer. To charge the battery,
connect iPod nano to a high-power USB 2.0 port or USB 3.0 port on your computer.
Leave iPod nano connected to your computer until the message disappears and iPod nano
appears in iTunes or the Finder. Depending on how depleted the battery is, you may need to
charge iPod nano for up to 30 minutes before it will start up.
To charge iPod nano more quickly, use the optional Apple USB Power Adapter.
If iPod nano displays a “Use iTunes to restore” message
m Make sure you have the latest version of iTunes on your computer (download it
from www.itunes.com/downloads).
m Connect iPod nano to your computer. When iTunes opens, follow the onscreen prompts to
restore iPod nano.
m If restoring iPod nano doesn’t solve the problem, iPod nano may need to be repaired. You can
arrange for service at the iPod Service & Support website at www.apple.com/support/ipod.