Appendix A Accessibility 169
•
Enable the Sleep/Wake or volume buttons:Tap Options below Hardware Buttons.
•
Keep iPhone from switching from portrait to landscape or from responding to other motions:Tap
Options, then turn o Motion.
•
Prevent typing:Tap Options, then turn o Keyboards.
•
Ignore all screen touches:Turn o Touch at the bottom of the screen.
•
Set a session time limit:Tap Time Limit Options at the bottom of the screen.
End the session. Triple-click the Home button, then enter the Guided Access passcode, or use
Touch ID (if enabled).
Switch Control
Switch Control lets you control iPhone using a single switch or multiple switches. Use any of
several methods to perform actions such as selecting, tapping, dragging, typing, and even free-
hand drawing. The basic technique is to use a switch to select an item or location on the screen,
and then use the same (or dierent) switch to choose an action to perform on that item or
location. Three basic methods are:
•
Item scanning (default), which highlights dierent items on the screen until you select one.
•
Point scanning, which lets you use scanning crosshairs to pick a screen location.
•
Manual selection, which lets you move from item to item on demand (requires multiple switches).
Whichever method you use, when you select an individual item (rather than a group), a menu
appears so you can choose how to act on the selected item (tap, drag, or pinch, for example).
If you use multiple switches, you can set up each switch to perform a specic action and
customize your item selection method. For example, instead of automatically scanning screen
items, you can set up switches to move to the next or previous item on demand.
You can adjust the behavior of Switch Control in a variety of ways, to suit your specic needs
and style.
Add a switch and turn on Switch Control
You can use any of these as a switch:
•
An external adaptive switch: Choose from a variety of popular USB or Bluetooth switches.
•
The iPhone screen: Tap the screen to trigger the switch.
•
The iPhone FaceTime camera: Move your head to trigger the switch. You can use the camera as
two switches: one when you move your head to the left, and the other when you move your
head to the right.
Add a switch and choose its action. Go to Settings > General > Accessibility > Switch Control >
Switches. If you use only one switch, it is your Select Item switch by default.
If you’re adding an external switch, you need to connect it to iPhone before it will appear in the
list of available switches. Follow the instructions that came with the switch. If it connects using
Bluetooth, you need to pair it with iPhone—turn on the switch, go to Settings > Bluetooth, tap
the switch, then follow the onscreen instructions. For more information, see Bluetooth devices on
page 42.
Turn on Switch Control. Go to Settings > General > Accessibility > Switch Control, or use the
Accessibility Shortcut. See Accessibility Shortcut on page 151.
Turn o Switch Control. Use any scanning method to select, then tap Settings > General >
Accessibility > Switch Control. Or triple-click the Home button.
