622312
22
Zoom out
Zoom in
Previous page
1/25
Next page
21
3-3 AC/DC Voltage Measurement
1. Set the slide switch at " V B " position.
2. Connect the black test lead to the "COM" terminal on the bottom of the meter and the red test lead to the
" V-Ω" terminal . You can now place the test probes on the conductors to make the measurement.
3. Pushing the AC/DC switch to select AC mode or DC mode.
3-4 Resistance Measurement
1. Set the slide switch at "Ω<" position.
2. Connect the black test lead to the "COM" terminal and red lead to the " V-Ω" terminal.
3. Verify that the power to the circuit under test is off. Connect test leads to the circuit to make the measurement.
4. Pushing the Ω / < switch to select Resistance mode or Continuity mode.
5. At < mode, Built - in buzzer sounds if the resistance of the circuit under test is less than 50Ω.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Appa 30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Appa 30 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info