729427
24
Zoom out
Zoom in
Previous page
1/32
Next page
23
OPERATION
This instrument has been designed and tested in accordance with IEC Publication 1010, Safety Requirements for Electronic
Measuring Apparatus and has been supplied in a safe condition. This instruction manual contains some Information and
warnings which have to be followed by the user to ensure safe operation and to retain the instrument in safe condition.
3-1 Preparation and Caution before Measurement
1. Before measurement, warm up for at least 60 seconds.
2. When the rotary function selector is changed during measurement, be sure do so only after removing the test leads from
the equipment.
3. If the equipment is used near noise generating equipment, be aware that may become unstable or indicate large errors.
4. # Maximum rated voltage to earth for voltage and current measurements terminals is 1000V CAT., 600V CAT. .
3-2 Voltage Measurements
1. Connect the red test lead to the VΩHz input terminal and the other (black) test lead to the COM terminal.
2. Set the rotary function to the V position.
3. Measurement of AC voltage can be performed by pushing the BLUE key switch.
#
WARNING
TO AVIOD ELECTRICAL SHOCK, HAZARD OR DAMAGE TO METER, DO NOT A ATTEMPT TO MEASURE
VOLTAGE THAT MIGHT EXCEED 1000V ms. DO NOT APPLY MORE THAN 1000V rms BETWEEN THE
COMMON INPUT TERMINAL AND EARTH GROUND.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Appa 106 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Appa 106 in the language / languages: English as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info