294082
97
Zoom out
Zoom in
Previous page
1/135
Next page
89NetBotz Appliance User’s Guide
SMS
Use the SMS (Short Messaging Service) icon to view or change the SMS settings used by your
appliance.
For more information, see “Creating a send short message e-mail alert action” on page 111.
Note: This icon is available only if a modem that supports SMS messaging is installed in and
configured for use with your appliance.
The SMS Configuration window consists of Basic, Advanced, and Status tabs. The Status tab displays
the level and quality of the SMS signal. The following controls and data appear in the Basic tab:
Field Description
SIM PIN / Confirm SIM PIN For modems that use a SIM (subscriber identification module), specify
the PIN to unlock the SIM.
Note: For modems that do not have a PIN, this field is blank. For infor-
mation about your SIM PIN please contact your GSM/GPRS service
provider.
Service center (SMSC) The address of the Short Message Service Center (SMSC) used by your
SMS service. The SMSC is an SMS server that sends messages. The
address for the SMSC is programmed into the SIM so you can leave
this field blank. Entering a value in this field overrides automatic
SMSC selection.
Note: For information about your SMSC please contact your GSM/
GPRS service provider.
Destination The e-mail destination address for an SMS message. The default value
for this field is 0000000000. When an SMS message is sent to an e-mail
destination address, the appliance puts the e-mail address at the
beginning of the message and sends it to the Destination address. The
SMSC receives the message, pulls out the e-mail address, and sends the
remainder of the message to the e-mail address.
Note: For information about your SMS Destination please contact your
GSM/GPRS service provider.
Interrupt PPP when an SMS alert
occurs
Enable this setting to allow SMS communication to override PPP
communications, if your modem supports both SMS and PPP
communications. Once the SMS message is sent, the PPP connection is
reestablished.
Note: PPP connections that have been initiated using the Request
Immediate Dial-up function are not interrupted, even if this checkbox is
checked.
97


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apc nbwl0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apc nbwl0455 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info