294082
93
Zoom out
Zoom in
Previous page
1/135
Next page
85NetBotz Appliance User’s Guide
6. For each pod that you want to centrally manage, select the pod from the Available Pods list
(ignore any instances of Base Enclosure in the list) and then click Share Remote Pod.
Setting up a Pelco Sarix shared IP camera pod
When installing a Pelco Sarix camera for use with a NetBotz appliance, perform the following steps
before following the normal IP camera pod setup procedure.
1. Connect the Sarix camera to your network.
2. Discover the camera's IP using the Pelco Device Utility.
3. In a Web browser, bring up the start page of the camera's Web UI (http://<ip_address>).
4. Click on the Login tab and log in with the default password.
5. Click Settings to display the settings page.
6. On the System tab, click Restore all Factory Defaults in the bottom right corner.
7. Wait for the camera to restart.
Setting up shared IP camera pods
To designate shared IP camera pods:
1. From the Appliance Settings area of the Configuration view, double-click the Rack Access
PX-HID Pod Sharing icon. The Rack Access PX-HID & Pod Sharing Configuration window
opens.
2. Click Add Remote Camera. The Configure Remote Device dialog box opens.
3. From the Remote List, select the camera you would like to share. The Hostname/IP address field
updates automatically.
If the IP camera is not listed (only IP cameras on the same subnet will appear in the list), go to
“To designate shared sensor pods:” on page 84, where you can add the camera by entering the
IP address of the camera.
Do not select any instances of Base Enclosure in the list. Those are for a future enhancement.
4. Enter information in the fields described below as needed. Then click OK. The camera appears in
the Remote Devices list.
5. Click the camera from the Remote Devices list. The list in the Available Pods area updates.
Field Description
Port TCP port over which pod sharing communications occur. Default
is 80 for HTTP, and 443 for HTTPS.
SSL Options The SSL options for pod sharing communications.
User name The User name used to access the remote device. Some pod
sharing functionality is only available to a user account with
Administrator privileges.
Password / Verify
password
Type the password to be used to access the remote device.
Timeout (seconds) The number of seconds that the appliance waits for a response from
the remote device before it considers the remote device
unresponsive.
93


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apc nbwl0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apc nbwl0455 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info