294082
69
Zoom out
Zoom in
Previous page
1/135
Next page
61NetBotz Appliance User’s Guide
This window features Primary and Backup tabs, each of which has the same fields available. The
settings on the Primary tab are used by default for any periodic HTTP reports. The settings on the
Backup tab are used if communication with the Primary server fails.
1. Type the appropriate values in the fields.
2. By default, all Periodic Reports are generated according to the Interval you specify. You can
specify that a Periodic Report is active only during specific time ranges. To configure Advanced
Scheduling:
a. Click Advanced Scheduling....
b. By default, all time periods in the schedule are Enabled. To disable the Periodic Report for
a period of time, click-and-drag over the time range, and click Disable. To enable the
Periodic Report for a period of time, click-and-drag over the time range, and click Enable.
c. Click OK to save the schedule and return to the Edit Periodic HTTP Report window.
3. Click OK.
Sensor Pods
Use the information in this section to configure integrated sensor pods, NetBotz sensor pods, Rack
Access PX-HID, and any other non-camera device associated with the appliance.
1. For integrated sensor pods and NetBotz sensor pods, double-click the Sensor Pods icon. The
Sensor Pod Configuration window appears with a list of integrated sensor pods and NetBotz
sensor pods. You can also right-click the Sensor Pod in the Navigation Pane and select
“Configure Pod” to display the window.
2. For non-camera shared IP devices, double-click the Shared Sensors icon. The Shared Sensor
Configuration window appears listing any shared non-camera shared IP devices.
For more information on shared devices, see “Pod Sharing” on page 81.
3. From the window that appeared, select the device to configure, then configure the device by
using the buttons described below and in greater detail on the following pages:
Click Settings to specify labels for the device and alert details if the device is disconnected.
Click External Ports to configure ports for various sensors and relays.
Click Sensors to configure the sensors associated with the camera and to create thresholds for
those sensors.
69


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apc nbwl0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apc nbwl0455 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info