294082
59
Zoom out
Zoom in
Previous page
1/135
Next page
51NetBotz Appliance User’s Guide
Modbus Slave System
Note: The Modbus Slave System icon is available only on the NetBotz Rack Monitor 570,
550 or on appliances for which the Advanced Software Pack has been purchased. For more
information, contact your NetBotz authorized reseller or the NetBotz support team
To configure your pod to communicate with a Modbus Master, double-click the Modbus Slave System
icon. The Modbus Slave System Settings window is displayed and a list of pods connected to your
appliance appears. Using this window you can assign slave IDs to the available sensor pods and view the
Modbus mapping of all pods and sensors configured on the current appliance.
Note: All sensors are Read-Only. Sensor states cannot be set with Modbus commands.
In the following procedures, it is assumed that you are starting from the Modbus Slave System Settings
window.
Assigning a slave ID to a pod
To assign a Modbus slave ID to a pod:
1. Select one or more pods from the list and click Generate Slave ID.
2. A slave ID is generated automatically and assigned to each selected pod.
If you wish to manually assign a slave ID to a specific pod:
1. Select the pod from the list and click Modify Pod Settings....
2. In the Modbus Slave Sensor Register Settings window, click the Slave Address drop-down menu
and select the slave ID you wish to assign to the pod. If the ID does not appear in the list, it is
already assigned to a pod.
Removing a slave ID from a pod
To remove an assigned slave ID from a pod, select one or more pods from the list and click Remove
Slave ID. Alternatively, you can click Modify Pod Settings... and select “No Slave Mapping” from the
Slave Address drop-down menu.
Viewing the Modbus map
To view the mapping of all assigned Slave IDs and register addresses, click View Modbus Map.
The Modbus map is a summary of all Modbus information associated with the appliance. The
information in the map can be exported to a text file for entry into the Modbus master map.
Note: After assigning slave IDs to pods, you must click Apply to save your changes before
viewing the Modbus map. Otherwise, the newly assigned pods will not be included in the
Modbus map.
Note: Up to 500 sensors can be seen for each Modbus pod or device. Pods or devices with
more than 500 sensors will be indicated by a yellow highlight of the pod or device in the
Modbus Slave System pane.
59


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apc nbwl0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apc nbwl0455 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info