294082

Apc nbwl0455 Manual

36
Zoom out
Zoom in
Previous page
1/135
Next page
28NetBotz Appliance User’s Guide
Running a historical data report
To define the parameters for the report:
1. Click History View on the Action/Information pane. The History View pane is displayed.
2. In the list of Pods, select one or more pods. Use Control-click or Shift-click to select multiple
pods. The Sensor list is populated with the sensors from the selected pods.
Note: Unplugged sensors will be displayed in the list, as will sensors with no
recorded data. Sensors that have been deleted from the system will not be shown.
3. In the list of Sensors, select one or more sensors. Use Control-click or Shift-click to select
multiple sensors.
4. In the Start time drop-down, select the amount of time for which you wish to display data.
5. Click Run History to run the report. Depending on the pods and sensors chosen, the report may
take a few minutes to complete for larger reports.
Note: Best results can be achieved by separating large report requests into logical
sections.
The report returns a sortable table with the pod name, sensor name, time the value was recorded, and the
value of the sensor. By default, the table is sorted by pod and sensor, with the most recent data listed first.
Only changes in value or state are listed in the table, so if a sensor has not changed during the report
scope, only the initial value will be listed. If a sensor has been disconnected during the entire scope of the
report, a empty table will be listed for that sensor.
Exporting the data to a text file
Once a report has been run, the displayed data can be exported into a text file. The file can be tab-
delimited, comma-delimited, or semi-colon-delimited.
Note: The Date column is exported in a 13-digit format (milliseconds since January 1st, 1970).
To export the data from a report:
1. On the History view, click Export Data.
2. Choose the delimiter for the file on the right side of the window. There are three choices,
Semicolon, Comma, and Tab.
3. Choose the location where you will save the file and enter a filename. Click Save.
… 36 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apc nbwl0455 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apc nbwl0455 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info