780166
8
Zoom out
Zoom in
Previous page
1/24
Next page
8
SPEED AND DISTANCE INDICATOR MODE CHANGE
Change of information displayed on the display
can be done by short press of the button H.
DISPLAY BACKLIGHT CONTROL
To turn the display backlight on or off, hold
the A button for 2 seconds. During bad light
conditions, the backlight turns on automatically.
If it then turns off, it’s necessary to turn it on
manually. The intensity of the backlight can be
set – see Parameters setting further. Doing this
will also turn on and off the front/rear lights on
Tour models.
ERASING TEMPORARY DATA
To erase temporary data, proceed according
to article Parameters setting. You will get to
erasing of temporary data through “Display
setting” and “TRIP reset” (as soon as the line
TRIP reset is highlighted, press the Gbutton
and set the “YES” value via Aand C buttons.
Then confirm it by the button G and temporary
data will be erased). Temporary data will be
automatically erased after reaching 99:59 h of
total ride time. Temporary data won’t be erased
in case of turning the display off.
PARAMETERS SETTING
To enter the parameters setting mode press the
Gbutton twice with interval ca. 0,3 seconds.
To switch between different menu items and
the parameters setting change use buttons
AandC. To confirm your choice, press the
Gbutton. To end the parameters setting mode,
press the G button twice with interval ca. 0,3
seconds. In case of inactivity for 10 seconds the
parameters setting mode ends automatically.
ITEM DISPLAY SETTING
TRIP
Lenght
of the trip
ODO
Total
distance
MAX
Maximum
speed
AVG
Average
Speed
RANGE
Remaining
range
TIME
Total time
of the ride
Unit – unit setting (km/mile)
Brightness –display backlight intensity setting (10, 30,
50, 75 or 100 %)
Auto Off –setting of automatic display shutdown
(1–9 min)
Max Pas – setting of assistance number (3/5/9)
Power View – setting of power indicator format
(power/torque)
SOC View –setting of battery indicator format
(percentage/voltage)
TRIP reset – temporary data erasure (TRIP, MAX, AVG,
TIME)
AL Sensitivity –setting of light sensitivity (0 – 5, 0 =
switched-off sensitivity sensor)
Set Clock – time setting
Back – back
ITEM INFORMATION
Setting items can differ according to the version
of display software.
Battery info – general information about the status and
attributes of the battery
Error Code – general information of carried-out error
reports (max. 10 items)
Back – back
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apache Ebikes 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apache Ebikes 2021 in the language / languages: English as an attachment in your email.

The manual is 1.01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info