807565
12
Zoom out
Zoom in
Previous page
1/32
Next page
12
LF
LF
AGM Auto Moto LiFePO4 Rep.
By repeatedly touching the mode switch, you can
sequentially select the following charging programs:
Image 3: Selection of charging programs
AGM Charging program for AGM, calcium and gel
batteries
Auto Charging program for car batteries
(wet batteries)
Moto Charging program for motorcycle batteries
(wet batteries)
LiFePO4 Charging program for lithium batteries
Rep Repair program for old, long-unused, and
sulphated batteries.
Only for wet batteries.
6.4 CONNECTING THE BATTERY
How to connect the charger with the battery. First,
connect the red clamp to the positive terminal (+), and
then connect the black clamp to the negative terminal (-)
of your battery. Be sure to follow this order!
Cut the battery o from the on-board
network of your vehicle. To do this, read
the manual of your vehicle or ask your
specialist workshop.
6.5 CHARGING PROCESS
The charging process will start automatically. The current
values of the active charging stage will be displayed on
the screen. A steady illumination of each indicator light
indicates the completion of that charging stage.
The charging stages cannot be manually
adjusted; they are performed by the charger's
automatic function.
The colour change of the mode switch during
the charging process is purely a visual design
element and serves no functional purpose.
Voltage [V]
Charging level
Current [A]
Figure 4: Charging levels
1 Desulphurisation
2 Softstart
3 Main charge
4 Absorption charging
5 Test mode
6 Reconditioning charge
7 Trickle charging
6.6 REMOVING THE CHARGER
First pull the plug out of the socket and
observe the sequence for disconnection.
This prevents sparks from forming. Since
charging generates a detonating gas, this is
particularly important for the sake of your
safety.
CAUTION
Disconnect the charger from the mains power supply.
First disconnect the pole callipers from the battery, rst
minus then plus.
Let the battery cool down.
Only for open batteries:
Fill the cells with distilled water up to the level specied
by the battery manufacturer. Close the battery cells with
the stoppers.
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
The device is maintenance-free if used according to its
intended purpose.
7.2 CARE
Clean the pole clamps every time the charging procedure
is completed. Remove all battery acid splashes from
the pole clamps to prevent corrosion. Clean the device
carefully with a dry cloth. Do not use liquids or chemical
cleaning agents. Never submerge the device in liquid.
Never allow liquid to ow over the device.
Before storing the device, roll up the cables properly in
order to prevent damages to the cables and device. Store
the device in a dry and clean location.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Apa 16649 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16649 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 1.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info