Manual Apa 16643 (page 10 of 28) (English, German, Dutch, French, Italian)

807582

Zoom out

Zoom in

1/28

Image 1: Front view

Image 2: Rear view Image 3: View right

6. OPERATING INSTRUCTIONS

6.1 OVERVIEW

6.2 CHARGING THE POWER PACK

6.2.1 CHARGING USING THE PLUG CHARGER

6.2.2 CHARGING USING THE 12 V MOTOR

VEHICLE CHARGING CABLE

Charge the Power Pack fully after purchase or before using

for the  rst time. Leave the Power Pack connected to the

charger for a maximum of 48 hours.

To check the charge status,  rst remove the charging cable,

then press the control button for the charge status (position

8 in the overview). If the voltmeter for the charge status

(Position 6 in the overview) shows a value of 50% or less,

yellow section (Figure 5), then the Power Pack must be

charged. If the value is over 50%, green section (Figure 6),

the Power Pack is ready for use.

Switch o the compressor and the working light. Remove

all consumers connected to the Power Pack. Plug the coaxial

connector of the plug charger (Position 13 in the overview)

into the charging socket of the Power Pack (Position 1 in the

overview). Now, connect the plug charger with the mains

socket. The charge control lamp (Position 2 in the overview)

now lights up. If the battery is completely empty, the

charging process will take max. 48 hours. After charging,

 rst disconnect the plug charger from the mains socket,

then disconnect the coaxial connector from the charging

socket of the Power Pack. If you now press the push button

for the charge status (Position 8 in the overview), the

Voltmeter shows a voltage of approximately 13 V for the

charge status (Position 6 in the overview).

Switch o the compressor and the working light. Remove

all consumers connected to the Power Pack. Plug the coaxial

connector of the 12 V motor vehicle charging cable (Position

14 in the overview) into the charging socket of the Power

Pack (Position 2 in the overview). Now connect the 12 V

plug to the 12 V socket of your vehicle. The charge control

lamp (Position 1 in the overview) now lights up. If the

battery is completely empty, the charging process will take

approximately 17 hours. After charging,  rst disconnect

the 12 V plug from the 12 V socket of your vehicle and then

1 Charging socket

2 Charging indicator light

3 LED working light

4 Black pole calliper (-)

5 Red pole calliper (+)

6 Charge status display

7 Switch for LED working light

8 Push button for charge status display

9 Manometer

10 ON/OFF switch for compressor

11 Storage compartment cover for air hose

12 12 V socket

13 Plug charger

14 Motor vehicle charging cable

15 Valve adapter

Image 5: Battery must be

charged

Figure 6: Battery is fully

charged

Do not leave the plug charger connected

for longer than 48 hours!

Image 4: Accessories

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Apa 16643 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.63 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Apa 16643 Manual

Product: